Bosch Appliances V1.0 operation manual 5iOS GUI software

Page 17

PLENA matrixInstallation en 17

5.5iOS GUI software

The iOS GUI is designed for use with iPad or iPad mini. This GUI app is designed for the end user who requires more control over the system (than is provided by the wall control panel) to wirelessly control and mix inputs in individual zones via the PLM‑8M8 DSP Matrix Mixer. The interface is similar in terms of features to the PC GUI user interface screen. The iOS app is available for download via the app store.

Notice!

To use the iOS GUI app will require the connection and configuration of a wireless router. Please refer to the manual supplied with the wireless router for appropriate configuration.

Bosch Security Systems B.V.

Operation manual

2013-06 V1.0

Image 17

Contents Plena matrix Page Table of contents Technical Data TroubleshootingMaintenance Safety precautions 1Safety1FCC and Ices Business Equipment For commercial or professional useEn Safety Plena matrix About this manual Release date Documentation version Reason Document historyPLM-4P125 and PLM‑4P220 Multi channel DSP Amplifiers 3System overviewPLM‑WCP Wall Control Panel PC Configuration and User GUIPLM‑8CS 8 Zone Call Station Plena matrix System overview en 4Planning DSP Matrix Mixer and Amplifiers 5InstallationCall Station 3Wall Control Panel Refer to Wall Control Panel DIP switch settings,PC GUI software PC GUI application software installationPC requirements See also5iOS GUI software Description ConnectionsWall Control Panel Number Description Multi channel DSP AmplifierNumber Description Panels 4DSP Matrix MixerDo not connect any device, other than a PLM‑4Px2x amplifier DSP Matrix Mixer and Amplifiers, Call station ID numbers DIP switch 7ConfigurationCall Station DIP switch settings Wall Control Panel DIP switch settings 3Multi Channel DSP Amplifier settings Proceed as follows 4DSP matrix mixer PC GUIDSP matrix mixer GUI main screen DSP matrix mixer PC GUI control functions UserMulti Channel DSP Amplifier PC GUI DSP setupOther DSP matrix mixer configurations in the GUI Plena matrix Configuration en Amplifier GUI main screen Amplifier Bridging Configuration Continue with one of the following chapters 8Operation1Start Continue with 2Call StationMaking an announcement Pre-settings and selectionsTop LED 0dB attenuation Select the input source Adjust the audio output volume levelWith DSP / PC GUI functionality Standalone without connection to the PC GUI3Operate the amplifier with the PC GUI Activate the active override audio input functionActivate the amplifier auto standby RS485 LED 5DSP Matrix Mixer3Operating the DSP Matrix Mixer/system with the GUI 1Activate the override input functionActivate the Alert/EVAC override function Problem Possible cause Possible solution DSP matrix mixer or TroubleshootingCall stations / Wall Control Problem Possible cause Possible solutionCall station’s microphone 1Customer service 10.1 Clean the units Maintenance10.2 Clean air vents 10.3 Check the connectors and groundingDSP Matrix Mixer Technical Data11.1 Electrical Logic inputs Multi Channel DSP Amplifier8CS and WCP RS485 AmplifierConnectors 11.1.4 Wall Control Panel Call Station11.2.3 Call Station 11.2 Mechanical11.2.1 DSP Matrix Mixer 11.2.4 Wall Control Panel Standards 11.3 Environmental conditions11.3.1 DSP Matrix Mixer 11.3.3 Call StationPage Bosch Security Systems B.V