Bosch Appliances V1.0 operation manual About this manual

Page 7

PLENA matrixAbout this manual en 7

2

About this manual

 

Please read this manual carefully before installing and operating any of the PLENA matrix

 

public address products and retain it for future reference.

2.1

Manual purpose

 

The purpose of this manual is to provide information required for installing, configuring,

 

operating and maintaining the PLENA matrix public address Hardware products. For

 

instructions on the latest PC GUI software, please download the software from the product

 

related information on the www.boschsecurity.com.website.

2.2

Digital document

 

This manual is available as a digital document in the Adobe Portable Document Format (PDF).

 

Refer to the product related information on www.boschsecurity.com.

2.3

Intended audience

 

This manual is intended for installers, operators and users of a PLENA matrix public address

 

system.

2.4

Alerts and notice signs

Four types of signs can be used in this manual. The type is closely related to the effect that may be caused if it is not observed. These signs - from least severe effect to most severe effect - are:

Notice!

Containing additional information. Usually, not observing a ‘notice’ does not result in damage to the equipment or personal injuries.

Caution!

!The equipment or the property can be damaged, or persons can be lightly injured if the alert is not observed.

Warning!

!The equipment or the property can be seriously damaged, or persons can be severely injured if the alert is not observed.

Danger!

Not observing the alert can lead to severe injuries or death.

2.5Copyright and disclaimer

All rights reserved. No part of this document may be reproduced or transmitted in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. For information on getting permission for reprints and excerpts, contact Bosch Security Systems B.V..

The content and illustrations are subject to change without prior notice.

Bosch Security Systems B.V.

Operation manual

2013-06 V1.0

Image 7
Contents Plena matrix Page Table of contents Maintenance TroubleshootingTechnical Data Business Equipment For commercial or professional use 1SafetySafety precautions 1FCC and IcesEn Safety Plena matrix About this manual Release date Documentation version Reason Document historyPLM-4P125 and PLM‑4P220 Multi channel DSP Amplifiers 3System overviewPLM‑8CS 8 Zone Call Station PC Configuration and User GUIPLM‑WCP Wall Control Panel Plena matrix System overview en 4Planning DSP Matrix Mixer and Amplifiers 5InstallationCall Station 3Wall Control Panel Refer to Wall Control Panel DIP switch settings,See also PC GUI application software installationPC GUI software PC requirements5iOS GUI software Wall Control Panel ConnectionsDescription Number Description Multi channel DSP AmplifierNumber Description Do not connect any device, other than a PLM‑4Px2x amplifier 4DSP Matrix MixerPanels DSP Matrix Mixer and Amplifiers, Call Station DIP switch settings 7ConfigurationCall station ID numbers DIP switch Wall Control Panel DIP switch settings 3Multi Channel DSP Amplifier settings Proceed as follows 4DSP matrix mixer PC GUIDSP matrix mixer GUI main screen DSP matrix mixer PC GUI control functions UserOther DSP matrix mixer configurations in the GUI DSP setupMulti Channel DSP Amplifier PC GUI Plena matrix Configuration en Amplifier GUI main screen Amplifier Bridging Configuration 1Start 8OperationContinue with one of the following chapters Continue with 2Call StationMaking an announcement Pre-settings and selectionsTop LED 0dB attenuation Select the input source Adjust the audio output volume levelWith DSP / PC GUI functionality Standalone without connection to the PC GUIActivate the amplifier auto standby Activate the active override audio input function3Operate the amplifier with the PC GUI RS485 LED 5DSP Matrix MixerActivate the Alert/EVAC override function 1Activate the override input function3Operating the DSP Matrix Mixer/system with the GUI Problem Possible cause Possible solution DSP matrix mixer or TroubleshootingCall stations / Wall Control Problem Possible cause Possible solutionCall station’s microphone 1Customer service 10.3 Check the connectors and grounding Maintenance10.1 Clean the units 10.2 Clean air vents11.1 Electrical Technical DataDSP Matrix Mixer Amplifier Multi Channel DSP AmplifierLogic inputs 8CS and WCP RS485Connectors 11.1.4 Wall Control Panel Call Station11.2.1 DSP Matrix Mixer 11.2 Mechanical11.2.3 Call Station 11.2.4 Wall Control Panel 11.3.3 Call Station 11.3 Environmental conditionsStandards 11.3.1 DSP Matrix MixerPage Bosch Security Systems B.V