Bosch Appliances V1.0 PC GUI software, PC requirements, PC GUI application software installation

Page 16

16 en InstallationPLENA matrix

5.4	PC GUI software
	Configuration of the DSP matrix mixer / system (inputs, outputs, settings and controls) is
	done by the PLENA matrix graphical user interface (GUI) PC software. Use the Amplifier PC
	software GUI, when configuring the multi channel DSP amplifier. It is important to always use
	the most up‑to‑date version of the PC GUI. Please check www.boschsecurity.com for the
	latest software updates.
5.4.1	PC requirements
	The Plena Matrix GUI configuration application software packages can be installed on any PC
	running the Microsoft Windows XP SP3, Windows Vista, Windows 7 or Windows 8 (non RT)
	operating system. Make sure that the PC is working correctly and free of viruses before
	installing the GUI configuration software. Using embedded operating systems is not
	recommended.

	Notice!
	Be sure that you use a user account with full Windows administration rights before starting
	software installation.

5.4.2	PC GUI application software installation
	The following instructions explain how to install the Bosch Plena Matrix GUI application
	software onto your Windows PC.

1. Download the latest version of PC GUI software from the Bosch website: www.boschsecurity.com.

– Follow the on‑screen instructions from the setup wizard.

– The installation process is started.

2. Click the finish button.

Notice!

The installation may prompt you to install Microsoft .NET framework 4.0, this is required to be able to run this GUI. Please follow the link provided onscreen to download and install before proceeding.

See also

–Connections, page 18

–Configuration, page 23

2013-06 V1.0

Operation manual

Bosch Security Systems B.V.

Image 16

Contents Plena matrix Page Table of contents Maintenance TroubleshootingTechnical Data 1Safety Safety precautions1FCC and Ices Business Equipment For commercial or professional useEn Safety Plena matrix About this manual Document history Release date Documentation version Reason3System overview PLM-4P125 and PLM‑4P220 Multi channel DSP AmplifiersPLM‑8CS 8 Zone Call Station PC Configuration and User GUIPLM‑WCP Wall Control Panel Plena matrix System overview en 4Planning 5Installation DSP Matrix Mixer and AmplifiersCall Station Refer to Wall Control Panel DIP switch settings, 3Wall Control PanelPC GUI application software installation PC GUI softwarePC requirements See also5iOS GUI software Wall Control Panel ConnectionsDescription Multi channel DSP Amplifier Number DescriptionNumber Description Do not connect any device, other than a PLM‑4Px2x amplifier 4DSP Matrix MixerPanels DSP Matrix Mixer and Amplifiers, Call Station DIP switch settings 7ConfigurationCall station ID numbers DIP switch Wall Control Panel DIP switch settings 3Multi Channel DSP Amplifier settings 4DSP matrix mixer PC GUI Proceed as followsDSP matrix mixer PC GUI control functions User DSP matrix mixer GUI main screenOther DSP matrix mixer configurations in the GUI DSP setupMulti Channel DSP Amplifier PC GUI Plena matrix Configuration en Amplifier GUI main screen Amplifier Bridging Configuration 1Start 8OperationContinue with one of the following chapters 2Call Station Continue withPre-settings and selections Making an announcementTop LED 0dB attenuation Adjust the audio output volume level Select the input sourceStandalone without connection to the PC GUI With DSP / PC GUI functionalityActivate the amplifier auto standby Activate the active override audio input function3Operate the amplifier with the PC GUI 5DSP Matrix Mixer RS485 LEDActivate the Alert/EVAC override function 1Activate the override input function3Operating the DSP Matrix Mixer/system with the GUI Troubleshooting Problem Possible cause Possible solution DSP matrix mixer orProblem Possible cause Possible solution Call stations / Wall ControlCall station’s microphone 1Customer service Maintenance 10.1 Clean the units10.2 Clean air vents 10.3 Check the connectors and grounding11.1 Electrical Technical DataDSP Matrix Mixer Multi Channel DSP Amplifier Logic inputs8CS and WCP RS485 AmplifierConnectors Call Station 11.1.4 Wall Control Panel11.2.1 DSP Matrix Mixer 11.2 Mechanical11.2.3 Call Station 11.2.4 Wall Control Panel 11.3 Environmental conditions Standards11.3.1 DSP Matrix Mixer 11.3.3 Call StationPage Bosch Security Systems B.V