PLENA matrixOperation en 33
8.2Call Station
The call station is used to make announcements in pre‑selected loudspeaker zones.
Notice!
Upon start up, the call stations will need to be identified by the processor. During this period the LEDs will flash in a rotating sequence; once this is complete the system is ready. Allow approx. 15 seconds before attempting an announcement.
1
2
3
4
5
3
Number | Item | Description |
|
|
|
1 | Microphone | Flexible gooseneck microphone stem with paging call activity LEDs (green). |
|
|
|
2 | Zone label | Paper labels can be inserted behind the thin plastic cover. Paper labels can be typed |
|
| and printed out via the PC GUI software. |
|
|
|
3 | Zone selection | This section allows the user to select the zone(s) that have been previously |
| button | configured in the PC GUI Software. |
|
|
|
3 | Zone selection | 1‑8 selection LED indicator (green/on = zone selected). On start up LEDs flash in a |
| LED | sequence. |
|
|
|
4 | PTT LED | – Bi‑color LEDs above the PTT button indicating: |
|
| – Red: Busy. Another |
|
| This |
|
| announcement is finished. |
|
| – Yellow: Wait. Your paging call is attempting to start. Do not speak yet. |
|
| – Green: Ready. The call station microphone is active, you may talk. |
|
|
|
5 | PTT button | – Press‑to‑talk (paging call) button. Keep button pushed down to continue to talk. |
|
|
|
Continue with:
–
–Making an announcement, page 34
Bosch Security Systems B.V. | Operation manual |