Bosch Appliances V1.0 operation manual Pre-settings and selections, Making an announcement

34 en OperationPLENA matrix

8.2.1	Pre-settings and selections
	The following pre‑selections and settings have to be done by the DSP matrix mixer PC GUI
	application at configuration of the system. Refer to DSP matrix mixer PC GUI, page 26
	– Setting button functions - zone groups per call station (see PC GUI help file for more
		information).
	–	Chime generation (enable/disable).
	–	Microphone gain control.
	– The call-station ID setting is pre-defined at configuration. Refer to Call Station DIP switch
		settings, page 23.

8.2.2	Making an announcement
	1.	Select zone(s) by touching the numbered capacitive zone selection areas:
		– The zone selection LED indicates the zone group to which the announcement is
		distributed.
		– To deselect the zone group, touch the capacitive area again (LED is off).
	2.	Multiple zone groups can be selected by continuing to use the numbered capacitive touch
		areas. Push the press‑to‑talk (PTT) button:

– When the LED above the PPT button goes green, you are ready to talk. Refer to Call Station, page 33.

– Only one call-station in the system is able to make an announcement at one time.

Notice!

Use slow deliberate touches on the capacitive touch areas on products. Excessively fast tapping may not be recognized by the unit.

A good rule when making an announcement through the call station is to keep at least one hands distance away from the microphone. This will reduce popping noises and distortion in the system.

2013-06 V1.0 Operation manual Bosch Security Systems B.V.