TRITON Training Guide
Tip: Controlling the effects in
More examples of Dynamic Modulation:
8.Press the EXIT key, then select Program B005 Fingertips Guitar (BANK B >5 >ENTER).
9.Press the MENU key, then press P8: Edit - Insert Effect.
10.Press the Routing tab to view the insert effect setup and BUS select - note that all oscillators are bussed to IFX1 (BUS Select setting and arrow to IFX1). Also note the insert effect names and chaining from IFX1 >2 >3 (arrows:
11.Press the IFX2 tab to view the settings for the Stereo Phaser.
12.Locate the Src: setting for the Wet/Dry mix of this effect - set to the Joystick
13.Press the IFX3 tab, and view the Wet/Dry Src:
14.Press to highlight Band 7 (or anywhere on the 16kHz line to it's right). Rotate the DIAL to the right to increase the 16kHz gain value of +13.0. Now play again, and use
Apply a new Insert effect:
15.Press the Insert FX tab, then press the OFF toggle button in the IFX4 box - it will change to ON.
16.Press the Chain checkbox to the left of IFX3, to chain IFX3 to IFX4.
17.In the IFX4 box on this page, press the popup button to the left of 000: No Effect. A center popup menu lists 16 available effects from the Filter / Dynamic (noted in the display, upper
36