TRITON Training Guide
2.Press the MENU key, then press P8 Edit - Insert Effect, and press the Routing tab. You'll see five stereo Insert effects, chained, at the upper - right of the display. There are eight columns of timbres
Timbre 1 Drums:
Timbre 2 Drums:
Timbre 3 Drums:
Timbre 4 Drums:
Timbre 5 SE:
Timbre 6 SE:
Timbre 7 / 8 SE:
IFX1 (chained from IFX1 through IFX5, so this timbre uses all the insert effects.
IFX5 (only bussed to IFX5's Stereo Compressor).
IFX1 (same bus as timbre 1).
Dkit (setting the bus to Dkit "points" this timbre's Program to the individual drum sound's insert effect busses - set in GLOBAL P5 Drum Kit - each drum sound can use / or not use a determined insert effect or be bussed to individual outputs! Plus, with this bus setting, you can set Send 1 and 2 levels to the Master effects!).
IFX3 ( No Stereo Graphic EQ (IFX1) or Stereo Compressor (IFX2) for this timbre - it's bus starts at IFX3 Stereo Phaser, and is chained through IFX4 and IFX5).
L/ R (no insert effects for this timbre - just Send 1 and 2 level settings to the Master effects!)
IFX3 (both timbres bussed to IFX3 - same as timbre 5).
TRITON makes it easy to route Combination timbres (and Sequencer tracks!)
Copying Insert effects in Combination mode:
Copying Insert effects in Combination mode is the same procedure as in Program mode. See the previous section "Copy an Insert effect from another Program" to see how this is done.
Note: When selecting effects for Inserts or Masters, effects 000 - 089 can be used. Effects 090 - 102 are double - size effects, and use twice the processing area of other effects. Master effects cannot use double - size effects.
Tip: For more information on Insert and Master Effects functions and features, see the TRITON Owners
manuals!
41