TRITON Training Guide
Sampling Through an Insert Effect
You can sample any audio source through any of TRITON's 102 available Insert effects!
Let's continue on from the previous steps:
20.Press the Input Setup tab, then, from Input 1's BUS Select popup menu, press IFX1.
21.Press the MENU key, then press P8: Insert Effect.
22.Press the OFF toggle button in the IFX1 box to turn it ON, then make sure 000: No Effect in the IFX1 box is highlighted.
23.With the Numeric keys, press 52, then press the ENTER key, to select Insert effect 052 Reverb Hall.
24.Speak in the microphone to hear the effect being applied. Press the IFX1 tab at the bottom of the display to view and edit the Reverb Hall parameters to your liking.
25.Press the MENU key, then press P0: Recording.
26.Press the Recording tab, then press the REC/WRITE key to "arm" the sampler. Speak into the microphone and adjust the Recording Level as needed.
27.Press Create to make a new index in the multisample to hold your upcoming sample.
28.Press the START/STOP key and record something like "Yeah Baby!". Your new sample, recorded with Insert effect, will playback on key G2 - the next - available index.
Tip: You can record one sample through five insert effects! Or try recording a
47