TRITON Training Guide
4.Using the value wheel, slider or buttons, select the Combination A33:
5.Touch the box next to "With Effects" so that it is checked.
6.Touch "O.K.". The Combination will load into the first 8 tracks.
Next, we'll prepare to record:
7.Touch the "Pref." Tab at the bottom right hand side of the screen.
8.Touch the box next to "Multi REC" so that it is checked.
9.Press the Arpeggiator "On/Off" button so that it is lit.
Now, record using the normal method:
10.Press the "REC/WRITE" button.
11.Press the "START/STOP" button. You'll get two measures counted in to get ready.
12.Record. When done, press the "START/STOP" button to finish recording, then the "LOCATE" button to rewind back to the start.
Tutorial 2
Single Channel Combination
First, we'll get the Combination into the Sequencer mode:
1.Press the SEQ. button to enter the Sequencer Mode.
2.Touch the arrow on the top right hand side of the screen.
3.Touch "Copy From Combi".
4.Using the value wheel, slider or buttons, select the Combination A28: "Random Blocks".
5.Touch the box next to "With Effects" so that it is checked.
6.Touch "O.K.". The Combination will load into the first 8 tracks.
Next, we'll find out which tracks have the Arp. assigned to them:
7.Press the MENU button.
8.Touch "Arpeggiator" on the screen.
You'll notice that Track 1 is used for Arp. A, and Track 2 is used for Arp. B. in instances where other Combinations are used, you would want to make note of which Arps. use which Tracks.
Now, that we know which tracks we need to work with, we need to set each arpeggiated part to a separate MIDI channel from the other tracks:
78