TRITON Training Guide
Note: "Put" pattern to track differs from "Copy" pattern to track in that the only note memory consumed is for the original pattern length - each time you "Put" a pattern, the sequencer points to the pattern itself. "Copy" pattern actually copies the note data from the pattern to the track.
13.Press the EXIT key to return to the P0: Play/REC page.
14.Press START/STOP. The pattern will play 4 bars, then stop, and the song will reset to measure 001.
Now to set a Play Loop for Track 1:
15.Let's insert some measures first - press the MENU key, then press P5: Track Edit. Press the Track Edit Page menu button (upper - right), and press Insert Measure from the popup menu.
16.Press Length: 001, and use the Numeric keys and ENTER key to set the length value to 32, then press OK. (Because the song is currently only 4 bars long, you need to add some measures in order for the Play Loop function to work - 32 measures should be plenty, right?)
17.Press the EXIT key to return to the Play / REC page.
18.Press the PlyLoop
19.In the Drums (Track 1) Loop End Measure field, set the value to 004. Press the START/STOP key, and the Track 1 will Play Loop continually - so you can rehearse and record additional tracks!
Rehearse and record the Bass track:
20.Press the START/STOP key to stop playback, then press the LOCATE key to reset the sequencer to measure 001:01.000 (upper - left).
21.Press the Track Select popup button (below the song name field), then press Track02: Bass from the popup menu. Press START/STOP and rehearse your Bass track a bit…then press START/STOP, then LOCATE - to stop playback and rese t the song to measure 1.
22.Press the REC/WRITE key - you'll hear the metronome and the sequencer is in stand - by mode.
23.Press START/STOP - you'll hear 2 bars of metronome precount before recording begins - record a Bass track for at least16 bars. If you make a mistake or want to
24.When you've finished recording the Bass track, press START/STOP to playback the song. Let's say you really like measures
56