Kolpak DA-98 manual Replaying the punched material, Exiting punch-in mode

Section 6 – Basic operations

3)At the punch-out point, the monitoring will go back to off-tape (the INPUT MONITOR indicators of armed tracks will go out), and when the post-roll point is reached, the tape will rewind to the pre-roll point.

NOTE

If the AUTO PLAY mode is active (press the AUTO PLAY key [12] so that the indicator lights), playback will start again as soon as the pre-roll point is reached.

4)The AUTO PUNCH indicator will light steadily, showing that the DA-98 is now in replay mode.

6.6.8 Replaying the punched material

1) To replay the punch-in, press the PLAY key.

Playback will start (the REC FUNCTION indica- tors of the armed tracks will continue to flash).

2)At the post-roll point, the tape will automatically rewind to the pre-roll point.

3)If you want to record the punch-in again, press the AUTO PUNCH key [10] so that the indicator flashes, and repeat the process described above.

4)If you are satisfied with the punch-in, follow the steps below, otherwise, press LOC 1 to return to the punch-in point, press the AUTO PUNCH key so that the indicator flashes, and repeat the take.

6.6.9 Exiting punch-in mode

1)Disarm any armed tracks (press the REC FUNCTION switches so that the indicators go out).

2)Press the CLEAR key [11].

This will exit the AUTO PUNCH (or rehearsal) mode.

The LOC 1 and LOC 2 keys will return to their usual functions, but the punch points are still retained in memory.

3)Press the AUTO MON key so that the indicator goes out.

Normal monitoring modes will now be in opera- tion (see 7, “Monitoring modes”)

06/97 – 1.00 – 6-7