Step 20
Install the condiment basket
You will need: condiment basket and end bracket.
Insert one wire end of the condiment basket into the hole in the side frame. Figure 32 (a). Insert the opposite wire end of the condiment basket into the hole in the end bracket. Hold the end bracket at an angle so the lower tab is inside the frame tube. Push the bracket into the frame. Figure 32 (b). Check to see that the lower tab of the bracket is hooked in the slot in the frame. Figure 32 (c).
To fully seat the bracket, you may have to tap it lightly with a hammer.
mWARNING: If the end bracket is in any way cracked or damaged, do not use the condiment basket. Call our Customer Service Center to order a new part.
Wire end
(a)
(b)
Slot in frame (view from below)
(c)
Figure 32
Step 21
Install the accessory rack
You will need: accessory rack.
Rest the left end of the accessory rack on the base panel. Figure 33 (a).
Insert the right hooks into the right side frame slots. Figure 33 (b).
Raise the left end up and slide left hooks into the left side frame slots. Figure 33.
Left side
frame slots
(a)
Right side
frame
(b)
Left hooks
Figure 33
24