Weber 1500 owner manual Complete accessory installation

Step 22

Complete accessory installation

You will need: Warm-Up Basket, warming rack, work table, three tubing plugs, thermometer and a hammer.

Insert one end of the Weber Warm-Up Basket into the hole in the right end of the lid and the other end into the slot in the left end of the lid. Figure 34 (a).

Set the warming rack into the slots at the rear of the cooking box. Figure 34 (b).

Set the work table onto the left side rails. Figure 34 (c).

Insert the thermometer into its holder. Figure 34 (d).

Insert the tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 34 (e).

(a)

(b) (d)

(c)

(e)

Figure 34

25