Weber 1500 owner manual Crossover Ignition System Operations

Page 32

Crossover Ignition System Operations

If the Crossover Ignition System fails to ignite the Front burner, light the Front burner with a match. If the Front burner lights with a match, then check the Crossover Ignition System.

■Check that both the white and black ignition wires are attached properly. Figure 15.

White wire

Black wire

Figure 15

■Check that the Crossover Ignition button pushes the igniter (button) down, and returns to the up position.

■Check to see if the igniter is loose in the frame. Tighten if necessary; see Step “Install igniter” for correct procedure.

If the Crossover Ignition System still fails to light, See Section "Manual Lighting", and contact Weber-Stephen Customer Service.

32

Image 32

Contents Genesis MDANGER MWARNINGS LP GAS Units onlyWarranty Patents and Trademarks Contents Gas supply testing General InstructionsStorage Operating areaGeneral Specifications for Piping Typical natural gas supply installation to a wood deck Recommended concrete pad requirements Step AssemblyCheck package contents Page Check contents of hardware packs Continue frame assembly Assemble the frameMeasure and drill holes MCAUTION a minimum of 2 bolts are required on each sideMethod 3 Concrete Method 1 ConcreteMethod 2 Concrete Method 4 Wood deck Add cooking box Check all valves are off Install manifold bracketConnect barbecue gas supply line to the natural gas supply Install igniter Purge air from gas linesCheck for gas leaks MWARNING Do not ignite burners while leak checkingInstall side panels Add base panelInstall Flavorizer Bars and Cooking Grates Install the bottom trayInstall Lid Add tool holders, control panel and burner control knobsInstall the condiment basket Install the accessory rackComplete accessory installation Lighting To ExtinguishManual Lighting Periodic Cleaning CookingAfter a Period of Nonuse Drippings and greaseAnnual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsGeneral Maintenance MCAUTION Do not enlarge the burner ports when cleaningWeber Spider Stopper Guards Main Burner Flame PatternReconnect gas supply line. See Check for gas leaks Crossover Ignition System Operations Burner does not light, or flame is low in High position MCAUTION Do not line the bottom tray with aluminum foil43-47 Parts List Final Word Thanks