Weber 1500 owner manual Add base panel, Install side panels

Page 21

Step 14

Add base panel

You will need: Base panel.

Put the right side in and down, tilt and set the left side in place. Figure 23.

Step 15

Install side panels

You will need: two side panels, and eight plastic buttons.

From the inside of the frame assembly, set the left side panel in place between the side frame legs.

Notice that there are two sets of holes in each side panel. Align the holes in the side panel to match the holes in the left side frame legs. Push in the four plastic buttons. Figure 24 (a).

Repeat with the right side panel.

Base panel	top
	top
	Left side
	panel
Figure 23	Right side
Figure 23	panel
	bottom

(a)

Figure 24

21

Image 21

Contents Genesis LP GAS Units only MDANGER MWARNINGSWarranty Patents and Trademarks Contents General Instructions Gas supply testingStorage Operating areaGeneral Specifications for Piping Typical natural gas supply installation to a wood deck Recommended concrete pad requirements Assembly Check package contentsStep Page Check contents of hardware packs Assemble the frame Continue frame assemblyMCAUTION a minimum of 2 bolts are required on each side Measure and drill holesMethod 1 Concrete Method 2 ConcreteMethod 3 Concrete Method 4 Wood deck Add cooking box Install manifold bracket Connect barbecue gas supply line to the natural gas supplyCheck all valves are off Purge air from gas lines Install igniterMWARNING Do not ignite burners while leak checking Check for gas leaksAdd base panel Install side panelsInstall the bottom tray Install Flavorizer Bars and Cooking GratesAdd tool holders, control panel and burner control knobs Install LidInstall the accessory rack Install the condiment basketComplete accessory installation To Extinguish LightingManual Lighting Cooking Periodic CleaningAfter a Period of Nonuse Drippings and greaseInspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceMCAUTION Do not enlarge the burner ports when cleaning General MaintenanceWeber Spider Stopper Guards Main Burner Flame PatternReconnect gas supply line. See Check for gas leaks Crossover Ignition System Operations MCAUTION Do not line the bottom tray with aluminum foil Burner does not light, or flame is low in High position43-47 Parts List Final Word Thanks