Teledyne Location and Mounting, Electrical Connections, Installation Model 3300PA

3 Installation Model 3300PA

3.2Location and Mounting

3.2.1 Control Unit Installation

The 3300PA Control Unit is designed to be rack mounted in a general purpose, indoor area, away from moisture and the elements. The unit should be installed at viewing level in a sheltered area.

Refer to the Outline diagram D-69220 for the physical dimensions of the analyzer.

3.2.2 Installing the Micro-Fuel Cell

A Micro-Fuel Cell is included as a separate item. It must be installed prior to instrument use.

Also, once it is expended, or if the instrument has been idle for a lengthy period, the Micro-Fuel Cell will need to be replaced.

To install or replace the Micro-Fuel Cell, follow the procedures in Chapter 5, Maintenance.

3.3Electrical Connections

Figure 3-1 shows the Model 3300PB rear panel. For detailed pinouts, see the wiring/interconnection drawings in the Drawings section at the rear of this manual.

Figure 3-1 Electrical Connectors for AC Control Unit

3-2 Teledyne Analytical Instruments