Omron Factory Default Settings, Technical Specifications HBP-1300, Main unit, Power supply

Specifications

Factory Default Settings

Factory default settings and backup are as shown below.

Backup

: Setting is retained even if the power is interrupted.

: Reverts to factory default setting if the power is turned off.

Setting Pressure Value	Settings	Factory Setting	Backup
Initial Inflation Pressure Value	AUTO, 220, 250, 280	AUTO
Auscultation Mode	ON, OFF	OFF
Auto Power Off	5 min, 10 min	5 min
Technical Specifications: HBP-1300
Main unit
Measurement Parameter	NIBP, PR
Dimension	Main unit: 123 x 201 x 99 (mm) 4.84 x 7.91 x 3.90 (inch) (W x H x D)
	AC adapter: 46 x 66 x 37 (mm) 1.81 x 2.60 x 1.46 (inch) (W x H x D)
	Battery: 54 x 43.5 x 15.4 (mm) 2.13 x 1.71 x 0.61 (inch) (W x H x D)
Weight	Main unit: Approx. 0.52 kg (not including accessories and options)
	AC adapter: Approx. 0.2 kg
	Battery: Approx. 0.1 kg
Display	7 segment LCD
Protection Class	Class II (AC Adapter)
	Internal powered equipment (when operating with battery only)
Degree of Protection	Type BF
MDD Classification	Class II a
Power supply
AC adapter	Input voltage range: AC 100 V to 240 V
	Frequency: 50/60 Hz
	Output voltage range: DC 6 V ±5%
	Rated output current: 1.6 A
Rechargeable battery	Type: 3.6 V, 1900 mAh
	Number of operation cycles when fully charged: 300
	Measurement conditions

•New battery fully charged

•Ambient temperature of 23°C (73.4°F)

•Using M-size cuff

•SYS 120 / DIA 80 / PR 60 (Inflation setting: AUTO)

•One 5-minute cycle consisting of “cuff measurement time + wait time”

30