Stopping the Measurement
To stop measurement while measurement is in progress, press [START/STOP] button.
Displaying Last Reading
The previous measurement value (systolic blood pressure, diastolic blood pressure, and pulse rate) and whether or not an irregular pulse wave was detected can be displayed. In the case of auscultation measurement, the auscultation icon appears.
Press the [ 
] or [ 
] button to display the previous data. This function is also available when the device is switched off.
If an irregular pulse wave or body movement was detected, the irregular pulse wave icon appears.
When the data was measured in “Auscultation Mode”, the auscultation icon appears.
Lights while the previous 
data are being displayed.
If held down at least 3 seconds when a measurement result is displayed, the measured data is cleared without being stored.
Note:
When the monitor is left idle for one minute, the backlight will disappear.
EN |
23