SECTION 5—WHEELCHAIR OPERATION
Splash Screen
NOTE: For this procedure, refer to
FIGURE 5.5.
This screen is displayed at startup of the joystick for about 2 seconds. This screen displays the software version and date information.
After this screen, the joystick displays the
Main Screen.
FIGURE 5.5 LCD Display Screens - Splash
Screen
Main Screen
NOTE: For this information, refer to FIGURE 5.6 on page 36.
During normal operation, the active drive is displayed in the upper half of the LCD display. Battery charge level is shown in the Battery Gauge Display (BGD) located on the right side of the LCD display. At full charge, solid blocks fill in all ten segments between E (Empty) and F (Full). As the battery becomes discharged, the top most segments will progressively disappear until no segments appear between E and F. At this level, the user should charge the batteries as soon as possible.
The lower half of the LCD display is the Information Center. The Information Center displays current data on the wheelchair.
Refer to LCD Display table on page 35 for descriptions of information shown.
| LCD DISPLAY |
|
|
ITEM | DESCRIPTION |
DRIVE NAME | This field shows the currently selected Drive’s Name. |
| Available choices are as follows: |
| Drive 1* |
| Drive 2* |
| Drive 3* |
| Drive 4* |
| “No Drive” selected via the programmer. |
| *NOTE: Drive names can be customized. Actual drive names may display differently. |
|
|
BATTERY LEVEL | This symbol shows the Battery Level and will change depending on the available |
INDICATOR | battery power. |
| This indicator is shown on every screen. |
|
|
STATUS MESSAGE | This area displays status or instructions. |
|
|
Part No. 1148076 | 35 | Pronto® M51™ Base with SureStep® |