SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Inspect/Adjust Weekly
❑Seat is secured to wheelchair frame.
❑Inspect tires for flat spots and wear.
❑Ensure casters are free of debris.
Inspect/Adjust Monthly
❑Ensure wheel mounting nuts are secure on drive wheels.
❑Ensure no excessive side movement or binding occurs when drive wheels are lifted and spun when disengaged (freewheeling).
❑Inspect caster assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑Ensure all caster/wheel/fork/headtube fasteners are secure.
❑Inspect for any loose hardware on the wheelchair.
❑Ensure casters are free of debris.
Inspect/Adjust Periodically
❑Ensure seat release latch is functional. Replace if necessary.
❑Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑Inspect charger AC power cord for damage. Replace if necessary.
❑Ensure casters are free of debris.
❑Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑Check that all labels are present and legible. Replace if necessary.
Troubleshooting Guide
NOTE: For additional troubleshooting information and explanation of error codes, refer to the Electronics Manual supplied with each wheelchair.
Part No. 1148076 | 23 | Pronto® M51™ Base with SureStep® |