How to Use the Standard Menu
Figure 1 shows the standard menu.
WELCOME
>>>>>>
RAMP: 10min menu 
EPR SETTING: 1 | |
change | exit |
USED HRS: | 08000 |
| exit |
USAGE: 1000/1068 | |
| exit |
MASK: ULTRA | |
change | exit |
SW: SX3960200 | |
| exit |
Figure 1: Standard menu screen
You enter the standard menu from the standby (RAMP) screen, by pressing the Left (menu) key.
How to Change the Expiratory Pressure Relief Setting
Your clinician may have set up your device to deliver expiratory pressure relief (EPR). This can be used to help ease any discomfort you may experience when breathing out during treatment. There are four settings:
• OFF (no EPR)
• 1 (lowest EPR)
• 2
• 3 (highest EPR).
The EPR SETTING screen only appears if your clinician has enabled access to EPR settings. To change the EPR setting, select Change (Left key). Press the Up or Down keys until you see the setting that you require.
How to Select the Mask Type
Scroll to MASK and select Change (Left key). Press the Up or Down keys until you see the mask type that you require.
How to Use the Standard Menu | 14 |