ResMed 338425/1 manual System Specifications, S8 Elite II no Accessories

Page 37

System Specifications

S8 Elite II (no Accessories)

Performance: Operating pressure range: 4 to 20 cm H2O

Dimensions (H x W x D): 112 mm x 164 mm x 145 mm

Weight: 1.4 kg

Power Supply

Input range for S8 Elite II with HumidAire 3i: 100–240V, 50/60Hz; 110V, 400Hz; 2.5A <140VA (110W) (maximum power consumption). Instantaneous peak power consumption <340VA.

Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed DC-12 converter for DC input.

Actual power consumption will vary, depending on factors such as the use of accessories, height above sea level and ambient temperature. Power consumption values for typical treatment conditions (using a breathing machine set to 0.5 L and 15 breaths/min with 2 m air tubing, and an Ultra Mirage mask) are given in the following table.

Device

Pressure

Power

Power

(cm H2O)

(VA)

(W)

 

S8 Elite II

5

18

7.6

 

 

 

 

 

10

23

11.6

 

 

 

 

 

15

30

15.9

 

 

 

 

 

20

39

20.7

 

 

 

 

Power outlet for HumidAire 3i

Outlet range: 100–240V, 50/60Hz; 110V, 400Hz; 2.0A

Air Filter: Two-layered, powder-bonded, polyester non-woven fiber

Air Tubing: Flexible plastic, 2 m

Air Outlet: The 22 mm conical air outlet complies with EN 1281-1

IEC 60601-1 Classifications: Class II (double insulation), Type CF

System Specifications

31

Image 37
Contents S8 Elite II System Page S8 Elite II System Blank Module Contents Replacing the Air Filter Servicing Your Responsibility IntroductionAbout the S8 Elite Medical InformationContraindications Page Adverse Effects S8 Elite S8 Elite II SystemMasks Humidifier AccessoriesResScan Data Card Module Set Up the S8 Elite How to Use the S8 EliteAssemble the Mask Stopping Treatment Start TreatmentSmartStart Excelnt Page Attach a HumidAire 3i Humidifier How to Attach a HumidifierStoring the HumidAire LCD Screen How to use the KeypadKeypad Keys How to Change the Ramp Time How to Change the SettingsHow to Change the Expiratory Pressure Relief Setting How to Use the Standard MenuHow to Select the Mask Type Other viewable information Shows the detailed menu How to Use the Detailed MenuHow to Change the Tube Length Settings MenuHow to Add a Humidifier or Front Cap How to Change the SmartStart SettingOptions Menu Results MenuServicing Menu Messages on the S8 Elite II LCDReplace Using a ResScan Data Card Module Using a Blank ModuleS8 Modules Using the Data Card to Update Settings Page Daily Cleaning Cleaning and MaintenanceWeekly Cleaning Periodic CleaningServicing Replacing the Air FilterFrequently Asked Questions Can I use my S8 Elite II if mains AC power is not available? No display TroubleshootingSystem ERR nnnn Leak Settings Success Remove Card S8 Elite II no Accessories System SpecificationsData Card All Devices where applicableData Card Module Symbols which appear on the device R001-307/1 System Specifications Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index PCB