ResMed 338425/1 manual S8 Modules, Using a Blank Module, Using a ResScan Data Card Module

Page 26

S8 Modules

Note: Do not remove modules while power is connected to the S8 Elite II.

Your S8 Elite II will have one of two modules fitted to the back: a blank module or a ResScan Data Card module.

Using a Blank Module

Please refer to the illustrations in section F of the illustration sheet.

The blank module is a protective cover on your S8 Elite II. At times, you may wish to remove or attach the module, for example to use another module.

To remove the blank module, pull it off the back of the S8 Elite II to show the data communications port (F-1).

To attach the blank module, push the blank module onto the data communications port, until the module clicks into place (F-2).

Note: To protect the data communications port, always ensure there is a module attached to the back of the device.

Using a ResScan Data Card Module

Please refer to the illustrations in section G of the illustration sheet.

The ResScan Data Card module is an accessory to the S8 Elite II. Use a ResScan Data Card with the Data Card module to collect data and update settings in the S8 Elite II. The module and card give your clinician convenient access to data about your treatment, and can provide you with new device settings from your clinician without your having to leave home.

Attaching the Module

To attach the Data Card module, push it onto the data communications port at the back of your S8 Elite II until it clicks into place (G-1).

Removing the Module

To remove the Data Card module, pull it off the back of the S8 Elite II (G-2).

Note: To protect the data communications port, always ensure there is a module attached to the device.

Using the Data Card to Collect data

Please refer to the illustrations in section H of the illustration sheet.

If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 Elite II, and to return the card to them. The Data Card will be provided in a convenient mailback envelope.

Data is copied onto the Data Card when it is inserted into the device. The original data will remain stored on the device.

It takes up to 30 seconds to copy data onto the Data Card.

S8 Modules

20

Image 26
Contents S8 Elite II System Page S8 Elite II System Blank Module Contents Replacing the Air Filter Servicing Introduction Your ResponsibilityContraindications Medical InformationAbout the S8 Elite Page Adverse Effects Masks S8 Elite II SystemS8 Elite ResScan Data Card Module AccessoriesHumidifier Assemble the Mask How to Use the S8 EliteSet Up the S8 Elite SmartStart Start TreatmentStopping Treatment Excelnt Page Storing the HumidAire How to Attach a HumidifierAttach a HumidAire 3i Humidifier Keypad Keys How to use the KeypadLCD Screen How to Change the Settings How to Change the Ramp TimeHow to Select the Mask Type How to Use the Standard MenuHow to Change the Expiratory Pressure Relief Setting Other viewable information How to Use the Detailed Menu Shows the detailed menuHow to Add a Humidifier or Front Cap Settings MenuHow to Change the Tube Length How to Change the SmartStart SettingServicing Menu Results MenuOptions Menu Messages on the S8 Elite II LCDReplace S8 Modules Using a Blank ModuleUsing a ResScan Data Card Module Using the Data Card to Update Settings Page Weekly Cleaning Cleaning and MaintenanceDaily Cleaning Periodic CleaningReplacing the Air Filter ServicingFrequently Asked Questions Can I use my S8 Elite II if mains AC power is not available? Troubleshooting No displaySystem ERR nnnn Leak Settings Success Remove Card System Specifications S8 Elite II no AccessoriesData Card Module All Devices where applicableData Card Symbols which appear on the device R001-307/1 System Specifications Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index PCB