ResMed 338425/1 manual Frequently Asked Questions

Page 31

Frequently Asked Questions

How will it feel when I am breathing with the S8 Elite II?

When you first use your S8 Elite II, you may feel uncomfortable breathing against the airflow. This is normal. You will continue to breathe normally while you sleep. Take time to adjust to this new sensation.

What do I do when I want to get up in the night?

If you need to get up during the night, remove your mask and stop therapy. Always remember to restart therapy and put your mask on when you return to bed.

What do I do if I feel air leaking out of the mask?

The flow generator delivers the most effective treatment when the mask is well fitted and comfortable. Treatment can be affected by leaks, so it is important to eliminate any leaks that may arise. For example, try repositioning the mask and adjusting the straps.

If you are using a nasal mask, try to keep your mouth closed during treatment. Air leaks from your mouth can decrease the effectiveness of your treatment. If mouth leaks are a problem, a full face mask or chin strap may help. Contact your clinician or equipment supplier for further details.

If you are using a full face mask and you have problems trying to get a comfortable mask fit, contact your sleep clinic or equipment supplier. You may benefit from a different size or style of mask.

You can also use the mask-fitting feature to help you fit your mask properly. See “Using the Mask-Fitting Feature” on page 9.

Anything special I should do before putting the mask on?

Before wearing your mask, wash your face to remove excess facial oils. This will allow a better fit and prolong the life of the mask cushion.

Do not use moisturiser when wearing a mask.

My mouth feels dry during treatment—what can I do?

You may experience dryness of the nose, mouth and/or throat during the course of treatment, especially during winter. In many cases, a humidifier may resolve this discomfort. Contact your clinician for advice.

My nose is irritated during treatment—what can I do?

You may experience sneezing and/or a runny or blocked nose during the first few weeks of treatment. In many cases, nasal irritation can be resolved with a humidifier. Consult your clinician or equipment supplier for advice.

Can I travel with the S8 Elite II?

INTERNATIONAL USE

Your S8 Elite II flow generator has an internal power supply that enables it to operate in other countries. It will operate on power supplies of 100–240V and 50/60Hz. No special adjustment is necessary, but you will require an approved power cord for the region in which you are using the device.

Frequently Asked Questions

25

Image 31
Contents S8 Elite II System Page S8 Elite II System Blank Module Contents Replacing the Air Filter Servicing Your Responsibility IntroductionAbout the S8 Elite Medical InformationContraindications Page Adverse Effects S8 Elite S8 Elite II SystemMasks Humidifier AccessoriesResScan Data Card Module Set Up the S8 Elite How to Use the S8 EliteAssemble the Mask Stopping Treatment Start TreatmentSmartStart Excelnt Page Attach a HumidAire 3i Humidifier How to Attach a HumidifierStoring the HumidAire LCD Screen How to use the KeypadKeypad Keys How to Change the Ramp Time How to Change the SettingsHow to Change the Expiratory Pressure Relief Setting How to Use the Standard MenuHow to Select the Mask Type Other viewable information Shows the detailed menu How to Use the Detailed MenuHow to Change the SmartStart Setting Settings MenuHow to Change the Tube Length How to Add a Humidifier or Front CapMessages on the S8 Elite II LCD Results MenuOptions Menu Servicing MenuReplace Using a ResScan Data Card Module Using a Blank ModuleS8 Modules Using the Data Card to Update Settings Page Periodic Cleaning Cleaning and MaintenanceDaily Cleaning Weekly CleaningServicing Replacing the Air FilterFrequently Asked Questions Can I use my S8 Elite II if mains AC power is not available? No display TroubleshootingSystem ERR nnnn Leak Settings Success Remove Card S8 Elite II no Accessories System SpecificationsData Card All Devices where applicableData Card Module Symbols which appear on the device R001-307/1 System Specifications Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index PCB