ResMed 338425/1 Cleaning and Maintenance, Daily Cleaning, Weekly Cleaning, Periodic Cleaning

Page 29

Cleaning and Maintenance

You should regularly carry out the cleaning and maintenance described in this section. Refer to your mask manual for detailed instructions.

Daily Cleaning

MASK

Clean the mask according to the instructions supplied with the mask.

AIR TUBING

Disconnect the air tubing from the S8 Elite II (and humidifier, if used) and hang the tubing and mask in a clean, dry place until next use.

HUMIDIFIER

If you are using a humidifier, remove it from the S8 Elite II and clean it according to the instructions in the humidifier user’s manual.

Weekly Cleaning

1.Remove the air tubing from the S8 Elite II and the mask.

2.Wash the air tubing in warm water using mild detergent. Rinse thoroughly, hang, and allow to dry.

3.Before next use, assemble the mask and headgear according to the user instructions.

4.Reconnect the air tubing to the air outlet and mask.

Periodic Cleaning

1.Clean the exterior of the S8 Elite II with a damp cloth and mild liquid soap.

2.Check the air filter for blockage or holes (see “Replacing the Air Filter” on page 24).

WARNING

! Beware of electric shock. Do not immerse the unit or power cord in water. Always unplug the unit before cleaning and be sure it is dry before plugging back in.

The mask system and air tubing are subject to normal wear and tear. Inspect them regularly for damage.

Cleaning and Maintenance

23

Image 29
Contents S8 Elite II System Page S8 Elite II System Blank Module Contents Replacing the Air Filter Servicing Your Responsibility IntroductionContraindications Medical InformationAbout the S8 Elite Page Adverse Effects Masks S8 Elite II SystemS8 Elite ResScan Data Card Module AccessoriesHumidifier Assemble the Mask How to Use the S8 EliteSet Up the S8 Elite SmartStart Start TreatmentStopping Treatment Excelnt Page Storing the HumidAire How to Attach a HumidifierAttach a HumidAire 3i Humidifier Keypad Keys How to use the KeypadLCD Screen How to Change the Ramp Time How to Change the SettingsHow to Select the Mask Type How to Use the Standard MenuHow to Change the Expiratory Pressure Relief Setting Other viewable information Shows the detailed menu How to Use the Detailed MenuHow to Change the Tube Length Settings MenuHow to Add a Humidifier or Front Cap How to Change the SmartStart SettingOptions Menu Results MenuServicing Menu Messages on the S8 Elite II LCDReplace S8 Modules Using a Blank ModuleUsing a ResScan Data Card Module Using the Data Card to Update Settings Page Daily Cleaning Cleaning and MaintenanceWeekly Cleaning Periodic CleaningServicing Replacing the Air FilterFrequently Asked Questions Can I use my S8 Elite II if mains AC power is not available? No display TroubleshootingSystem ERR nnnn Leak Settings Success Remove Card S8 Elite II no Accessories System SpecificationsData Card Module All Devices where applicableData Card Symbols which appear on the device R001-307/1 System Specifications Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index PCB