Ericsson LBI-38377E manual Scan DIS - The radio is not programmed to scan, Using Scan, Scan Model

channel. One of the following messages may be momentarily displayed:

"SCAN DIS" - – The radio is not programmed to scan.

"FIXED P1" - – A priority-one channel has been programmed into the radio. A new priority-one channel can not be selected.

"FIXD LST" - – A fixed scan list is pro- grammed into the radio. It is not possible to change the list without reprogramming the radio.

4.To add or delete additional channels, repeat steps 2 through 4.

5.Press the EXIT button to return to normal operation.

Using Scan

Toggle scan on or off by pressing SCAN. The "SCN" status flag turns on when the radio is scan- ning.

TELEPHONE INTERCONNECT CALLS

SCAN Model

Telephone interconnect calls can be placed on radio channels equipped with this capability. Each channel programmed into the radio can be pro- grammed for telephone interconnect by enabling it for DTMF dial operation. One (1) of the ten (10) pro- grammed telephone numbers can be selected and automatically dialled.

Communication takes place in a simplex mode. In other words, the PTT BUTTON must be pressed each time you wish to transmit and it must be re- leased to receive.

Placing A Call

Ten (10) telephone numbers can be programmed in the radio for automatic dial operation. Typically, telephone numbers programmed into the radio by the maintenance personnel each have a specific name (8 characters maximum) assign. For example: "OF- FICE" or "HOME". To recall a number and complete a call, proceed as follows:

20