Ericsson LBI-38377E manual Menu Button Scan Model, Menu Display, Select Button

Page 9

MENU BUTTON (Scan Model)

Pressing the MENU button causes the radio to scroll through up to six (6) different menus pro- grammed into the radio. After the desired menu is displayed, the feature within the menu is selected with the SEL button. The menus that may be pro- grammed are:

Menu Display

Function Or Use

"CHANNEL" The MENU and SEL buttons are programmed for channel selec- tion. When this display appears, select the desired channel with the SEL button and then press EXIT.

"MODE" The MENU and SEL buttons are programmed for mode selection. When this display appears, se- lect the desired mode by press- ing the SEL button and then press EXIT.

"PHONE" Allows selection of one (1) of the ten (10) programmed telephone numbers for automatic dialling.

"KEY LOCK" Allows the keypad buttons to be locked or unlocked.

"SCAN A/D" Allows channels to be added to or deleted from the scan list for the current mode. The priority- one channel and the priority-two channel are also set within this menu.

"ALERT" Allows the alert tones to be dis- abled or enabled.

Figure 4 - M-PA Scan Model Keypad

SELECT BUTTON

Selecting different features within each menu is accomplished with the SEL button. First, the menu mode must be enabled and the desired menu must be chosen by pressing and releasing the MENU button until the desired menu appears in the display.

9

Image 9

Contents Operator’s Manual Ericsson Inc Table of Contents TTD Safety Not ApplicableVolume Control Knob Controls ON/OFF SwitchIntroduction Control KnobPTT Button Monitor ButtonEmergency Button PA Personal Radio Side View Front View Menu Button Scan Model Alert Allows the alert tones to be dis- abled or enabledMenu Display KEY Lock Allows the keypad buttons to be locked or unlockedScan Button Exit ButtonChannel ModePA System Model Radio Select Button Dtmf Keypad IndicatorsUniversal Device Connector TX Transmitter enabled On when the radio is transmittingOperation POWER-UP Carrier Control TimerAlert Tones Channel BusyPress the Menu button until Mode ap- pears in the display MODE/CHANNEL/CG SelectionPress the Menu button until Channel appears in the display Receiving a Message Adjust the volume as necessaryListen for a reply Transmitting a MessagePress the Menu button until Scan A/D is displayed Adding Channels To And Deleting Channels From The Scan ListScan DIS - The radio is not programmed to scan Using ScanTelephone Interconnect Calls Scan ModelPress the Menu button until Phone ap- pears in the display If the SCN status flag is on, press Scan to turn scan offTelephone Interconnect Calls System Models Placing a Manually Dialed CallPress and hold the PTT Button to key the transmitter While holding the PTT BUTTON, press Release the PTT Button when the dial sequence is completeRelease the PTT Button and listen for a dial tone Placing An Automatically Dialed CallKEY Lock Menu Scan and System models Lock The KeypadEnable The Alert Tones Disable The Alert TonesProgrammable Features Unlock The KeypadRadio Programmable Programmable by ChannelOperating Tips When using your two-way radio, remember these rulesBattery Packs Installing the Battery Pack Removing the Battery Pack Installing the Battery PackContains a rechargeable, recyclable Swivel Mount Removal ReplacementIntrinsically Safe Usage BatteriesPacity Short Case Accessories Warranty Warranty becomes void if NICKEL-CADMIUM Battery WarrantyPage Emergency Numbers