Ericsson LBI-38377E manual Select Button

Page 12

"KEY LOCK" Allows the keypad buttons to be locked or unlocked.

"SCAN A/D" Allows channels to be added to or deleted from the scan list for the current mode. The priority- one channel and the priority-two channel are also set within this menu.

"ALERT" Allows the alert tones to be dis- abled or enabled.

"PHN EDIT" Allows editing of the telephone phone numbers programmed into the radio.

EXIT BUTTON

Pressing the EXIT button will cause the radio to exit the current menu display and return operation to the channel currently selected. If the menu mode is not enabled when the button is pressed, pressing this button will turn the display and keypad backlighting on for thirty (30) seconds (if the backlight is pro- grammed on).

Figure 6 - M-PA Scan Model Keypad

SCAN BUTTON

Pressing the SCAN button on the keypad will toggle scan operation on and off. When the radio is scanning, the "SCN" status flag in the display will show and all channels on the scan list will be scanned.See SCANNING CHANNELS for additional details.

SELECT BUTTON

Selecting different features within each menu is accomplished with the SEL button. First, the menu

12

Image 12

Contents Operator’s Manual Ericsson Inc Table of Contents Safety Not Applicable TTDControls ON/OFF Switch Volume Control KnobIntroduction Control KnobPTT Button Monitor ButtonEmergency Button PA Personal Radio Side View Front View Alert Allows the alert tones to be dis- abled or enabled Menu Button Scan ModelMenu Display KEY Lock Allows the keypad buttons to be locked or unlockedExit Button Scan ButtonChannel ModePA System Model Radio Select Button Indicators Dtmf KeypadTX Transmitter enabled On when the radio is transmitting Universal Device ConnectorCarrier Control Timer Operation POWER-UPAlert Tones Channel BusyPress the Menu button until Mode ap- pears in the display MODE/CHANNEL/CG SelectionPress the Menu button until Channel appears in the display Adjust the volume as necessary Receiving a MessageTransmitting a Message Listen for a replyAdding Channels To And Deleting Channels From The Scan List Press the Menu button until Scan A/D is displayedUsing Scan Scan DIS - The radio is not programmed to scanTelephone Interconnect Calls Scan ModelIf the SCN status flag is on, press Scan to turn scan off Press the Menu button until Phone ap- pears in the displayTelephone Interconnect Calls System Models Placing a Manually Dialed CallPress and hold the PTT Button to key the transmitter Release the PTT Button when the dial sequence is complete While holding the PTT BUTTON, pressRelease the PTT Button and listen for a dial tone Placing An Automatically Dialed CallLock The Keypad KEY Lock Menu Scan and System modelsDisable The Alert Tones Enable The Alert TonesProgrammable Features Unlock The KeypadProgrammable by Channel Radio ProgrammableWhen using your two-way radio, remember these rules Operating TipsBattery Packs Installing the Battery Pack Installing the Battery Pack Removing the Battery PackSwivel Mount Removal Replacement Contains a rechargeable, recyclableIntrinsically Safe Usage BatteriesPacity Short Case Accessories Warranty NICKEL-CADMIUM Battery Warranty Warranty becomes void ifPage Emergency Numbers