Ericsson LBI-38377E manual Battery Packs Installing the Battery Pack

Page 28

2.The use of profane or obscene language is prohibited by Federal law.

3.It is against the law to send false call letters, or false distress or emergency messages.

4.The FCC requires that you keep conversa- tions brief and confine them to business. To save time, use coded messages whenever possible.

5.Using your radio to send personal mes- sages (except in an emergency) is a viola- tion of FCC rules. You may send only those messages that are essential for the opera- tion of your business.

6.It is against Federal law to repeat or other- wise make known anything you overhear on your radio. Conversations between others sharing your channel must be regarded as confidential.

7.The FCC requires that you identify yourself at certain specific times by means of your

call letters. Refer to the rules that apply to your particular type of operation for the proper procedure.

8.No changes or adjustments shall be made to the equipment except by an authorized or certified electronic technician.

BATTERY PACKS

INSTALLING THE BATTERY PACK

1.Ensure the ON/OFF SWITCH on battery pack is in the off position.

2.Hold the radio and battery pack with the back of them facing you.

3.Align the battery pack and radio slide grooves. See Figure 8.

4.Slide the battery pack fully into the radio until the battery release latch clicks into place.

28

Image 28

Contents Operator’s Manual Ericsson Inc Table of Contents Safety Not Applicable TTDControls ON/OFF Switch Volume Control KnobIntroduction Control KnobMonitor Button PTT ButtonEmergency Button PA Personal Radio Side View Front View Alert Allows the alert tones to be dis- abled or enabled Menu Button Scan ModelMenu Display KEY Lock Allows the keypad buttons to be locked or unlockedExit Button Scan ButtonChannel ModePA System Model Radio Select Button Indicators Dtmf KeypadTX Transmitter enabled On when the radio is transmitting Universal Device ConnectorCarrier Control Timer Operation POWER-UPAlert Tones Channel BusyMODE/CHANNEL/CG Selection Press the Menu button until Mode ap- pears in the displayPress the Menu button until Channel appears in the display Adjust the volume as necessary Receiving a MessageTransmitting a Message Listen for a replyAdding Channels To And Deleting Channels From The Scan List Press the Menu button until Scan A/D is displayedUsing Scan Scan DIS - The radio is not programmed to scanTelephone Interconnect Calls Scan ModelIf the SCN status flag is on, press Scan to turn scan off Press the Menu button until Phone ap- pears in the displayPlacing a Manually Dialed Call Telephone Interconnect Calls System ModelsPress and hold the PTT Button to key the transmitter Release the PTT Button when the dial sequence is complete While holding the PTT BUTTON, pressRelease the PTT Button and listen for a dial tone Placing An Automatically Dialed CallLock The Keypad KEY Lock Menu Scan and System modelsDisable The Alert Tones Enable The Alert TonesProgrammable Features Unlock The KeypadProgrammable by Channel Radio ProgrammableWhen using your two-way radio, remember these rules Operating TipsBattery Packs Installing the Battery Pack Installing the Battery Pack Removing the Battery PackSwivel Mount Removal Replacement Contains a rechargeable, recyclableBatteries Intrinsically Safe UsagePacity Short Case Accessories Warranty NICKEL-CADMIUM Battery Warranty Warranty becomes void ifPage Emergency Numbers