Ericsson LBI-38377E manual Lock The Keypad, KEY Lock Menu Scan and System models

Page 24

4.Press the SEL button to scroll through the phone list until the programmed or stored name for the desired telephone number ap- pears in the display.

5.Press and release the PTT BUTTON to automatically dial the selected number.

6.When the called party answers, press the PTT BUTTON to transmit and release it to receive. Repeat as needed.

7.At the completion of the call, press the EXIT button. The radio will then transmit the dis- connect digit to hang-up.

Editing The Programmed Telephone Numbers Or Storing A New Telephone Number

Any of the programmed or stored telephone num- bers may be edited using the "PHN EDIT" menu. This menu also allows new phone numbers to be stored (added) to the list. Up to a maximum to ten (10) different numbers can be programmed and/or stored in the radio.

1.Press the MENU button until "PHN EDIT" appears in the display.

2.Press the SEL button until the name for the desired telephone number appears in the display.

3.Enter the new number using the numeric keypad. If a mistake is made, press the MONITOR BUTTON to abort and then enter the correct number.

4.After the correct number has been entered, press EXIT to enter the new number and return to normal operation.

"KEY LOCK" MENU (Scan and System models)

The "KEY LOCK" menu allows the keypad (SCAN button and the twelve (12) numeric buttons) to be locked or disabled to prevent accidental activa- tion. If this menu is programmed into the radio, lock and unlock the keypad as follows:

Lock The Keypad

1.If the "SCN" status flag is on, press SCAN to turn scan off.

2.Press the MENU button until "KEY LOCK" appears in the display.

24

Image 24

Contents Operator’s Manual Ericsson Inc Table of Contents Safety Not Applicable TTDControls ON/OFF Switch Volume Control KnobIntroduction Control KnobPTT Button Monitor ButtonEmergency Button PA Personal Radio Side View Front View Alert Allows the alert tones to be dis- abled or enabled Menu Button Scan ModelMenu Display KEY Lock Allows the keypad buttons to be locked or unlockedExit Button Scan ButtonChannel ModePA System Model Radio Select Button Indicators Dtmf KeypadTX Transmitter enabled On when the radio is transmitting Universal Device ConnectorCarrier Control Timer Operation POWER-UPAlert Tones Channel BusyPress the Menu button until Mode ap- pears in the display MODE/CHANNEL/CG SelectionPress the Menu button until Channel appears in the display Adjust the volume as necessary Receiving a MessageTransmitting a Message Listen for a replyAdding Channels To And Deleting Channels From The Scan List Press the Menu button until Scan A/D is displayedUsing Scan Scan DIS - The radio is not programmed to scanTelephone Interconnect Calls Scan ModelIf the SCN status flag is on, press Scan to turn scan off Press the Menu button until Phone ap- pears in the displayTelephone Interconnect Calls System Models Placing a Manually Dialed CallPress and hold the PTT Button to key the transmitter Release the PTT Button when the dial sequence is complete While holding the PTT BUTTON, pressRelease the PTT Button and listen for a dial tone Placing An Automatically Dialed CallLock The Keypad KEY Lock Menu Scan and System modelsDisable The Alert Tones Enable The Alert TonesProgrammable Features Unlock The KeypadProgrammable by Channel Radio ProgrammableWhen using your two-way radio, remember these rules Operating TipsBattery Packs Installing the Battery Pack Installing the Battery Pack Removing the Battery PackSwivel Mount Removal Replacement Contains a rechargeable, recyclableIntrinsically Safe Usage BatteriesPacity Short Case Accessories Warranty NICKEL-CADMIUM Battery Warranty Warranty becomes void ifPage Emergency Numbers