Agilent Technologies FS2334 Software Requirements, Setting up the 169xx Analyzer, 169xx Licensing

Page 14

Software Requirements

Setting up the 169xx Analyzer

A CD containing the 16900 software is included in the FS1136 package. The CD contains a setup file that will automatically install the configuration files and protocol decoder onto a PC containing the 16900 operating system or onto a 16900 analyzer itself.

To install the software simply double click the .exe file on the CD containing the FS1136 and the FS1117 software. After accepting the license agreement the software should install within a couple of minutes. Duplicate the process for the FS1140 Protocol Checking software.

169xx Licensing

Once the software has been successfully installed you must license the software. Please refer to the entitlement certificate for instructions on licensing each software product. Please note that you are licensing 3 products, both the FS1136 and

FS1117 Protocol Decoders AND the FS1140 Protocol Checking software and all require separate license installation on your system. The software can only be installed on one machine. If you need to install the products on more than one machine you must contact the FuturePlus sales department to purchase additional licenses.

Loading 169xx configuration files and General Purpose Probe Feature

When the software has been licensed you are able to load a configuration file. You can access the configuration files by clicking on the folder that was placed on the desktop. When you click on the folder it should open up to display all the configuration files to choose from. If you put your mouse cursor on the name of the file a description will appear telling you what the setup consists of, once you choose the configuration file that is appropriate for your configuration, the 16900 operating system should execute. The protocol decoder automatically loads when the configuration file is loaded. If the decoder does not load, you may load it by selecting tools from the menu bar at the top of the screen and select the decoder from the list.

Once you have loaded a configuration file on the 169xx machine you can find out how to attach the logic analyzer cables to the probe by going to the workspace and selecting Properties on the General Purpose Probe tool icon that appears before the logic analyzer icon. Once you click on the Properties box a new window will appear showing which analyzer pod attaches to which probe cable.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DDR2 Dimm High Speed Probe FS2334 Product Warranty Appendix For Technical Support For Sales and Marketing SupportProduct Warranty Exclusive RemediesSoftware License Agreement Introduction DefinitionsProbe Components Probe Technical Feature SummaryFS2334 Probe Description Connecting the DDR2 Probe to the Logic Analyzer Signal Assignments on Probe PodsSignal Threshold Voltage Settings Test Points Buffered signals on the probe Connecting to your Target SystemSignal Isolation on the Probe Write state analysis Page 169xx Licensing Setting up the 169xx AnalyzerSoftware Requirements Offline Analysis Page Taking a Trace, Triggering, and Seeing Measurement Results Decoding DDR CommandsTimingZoom Analysis State Analysis OverviewState Analysis Operation Read and Write at 667MT/s or slower Process for setting sampling positions at speeds of 800MT/s State analysis calibration procedure Page Page Adjusting the sampling positions with controlled stimulus Page State Display FS1140 Installation and Licensing Loading the FS1140Setting up the FS1140 DDR2 Tool Statistics Export Timing AnalysisPage Header 1 Command AppendixDP16P/ CLK CK0 Header 2 Command NC3 Header 3 Write DQ9 Header 4 Write Ground D13 DQ22 20K ohm to D14 DQ18 D15 DQ23 Header 5 Write CB0 CB1 20K ohm to Ground D13 No connection D14 D15 Header 6 Write DM5DQS14 Header 7 -Write 20K ohm to Ground D13 DQ50 D14 DQ55 D15 DQ51 Header 8 Write SDA Header 12 Read Duplicates only data signals 20K ohm to Ground D15 No connection Header 10 Read Duplicates only data signals DP16P/ CLK CB7 Header 11 Read Duplicates only data signals DP16P/ CLK RAS Header 9 Read Duplicates only data signals DP16P/ CLK CK2 Header 13 Read Duplicates only data signals Ground D13 DQ50 20K ohm to D14 DQ55 D15 DQ51
Top Page Image Contents