Agilent Technologies FS2334 user manual FS1140 Installation and Licensing, Loading the FS1140

Page 27

DDR2 Protocol Checking and Performance Tool (FS1140)

The FS1140 DDR2 Protocol Checking and Performance Tool is a separate VBA-based application that provides a detailed analysis of a 16900 format logic analyzer trace file, captured with an FS2334 DDR2 Interposer probe. The FS1140 is provided as a single user, node-locked license that requires separate licensing, and the Agilent system needs the Agilent VBA Runtime or Development license present as well.

NOTE: The Functional Performance portion of this software will NOT work with 2 FRAME configurations

The FS1140 provides 3 different types of analysis on the captured trace data.

First, it provides a flag any where there is a violation of any of 6 different DDR2 protocol rules. These include:

1)Refresh with Active Banks

2)Write to a Bank that is not Active

3)Read from a Bank that is not Active – Not available on FS2334 probe

4)Mode Register Set with Active Banks

5)Bank not Precharged before being Activated

6)Data Burst interrupted by a Command

Second, the FS1140 provides summary statistics of the transactions captured in the trace file. These measurements provide some indication of the performance of the DDR2 system during the trace capture and include % of Write and Read commands, % of Clock cycles with data activity,

Third, the FS1140 software will provide measurements of the Data Window eye width on a bit by bit basis across all Timing Zoom data in the trace file; additionally it will identify those signals with the smallest eye width.

FS1140 Installation and Licensing

The FS1140.exe file is on the CD used to install the FS2334 configurations and Protocol Decoder in your Windows environment. It can be installed by simply double-clicking on the file. Please note that you are licensing 3 products, both the FS1136 and FS1117 Protocol Decoders AND the FS1140 Protocol Checking software and they require separate installation on your system. The software can only be installed on one machine. If you need to install the products on more than one machine you must contact the FuturePlus sales department to purchase additional licenses.

Loading the FS1140

After one of the State listing configuration files has been loaded, go to the “Windows” selection on the Title bar from the Overview tab in the Logic Analyzer application. The application can be either on or off-line at this time. From the “Windows” drop-down, select “new VBAView” and from that list, select “DDR2 Checking and Performance”. Once that is selected, a new window will appear providing some choice as to where the DDR2 Diagnostic Window will attach to the DDR2 data. We recommend that the user select to attach it directly after the logic analyzer module, so that filtering effects from the Protocol Decoder do not impact the DDR2 Diagnostic Tool’s results.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DDR2 Dimm High Speed Probe FS2334 Product Warranty Appendix For Sales and Marketing Support For Technical SupportExclusive Remedies Product WarrantySoftware License Agreement Definitions IntroductionProbe Technical Feature Summary FS2334 Probe DescriptionProbe Components Signal Assignments on Probe Pods Signal Threshold Voltage SettingsConnecting the DDR2 Probe to the Logic Analyzer Test Points Connecting to your Target System Signal Isolation on the ProbeBuffered signals on the probe Write state analysis Page Setting up the 169xx Analyzer Software Requirements169xx Licensing Offline Analysis Page Decoding DDR Commands TimingZoom AnalysisTaking a Trace, Triggering, and Seeing Measurement Results Overview State AnalysisState Analysis Operation Read and Write at 667MT/s or slower Process for setting sampling positions at speeds of 800MT/s State analysis calibration procedure Page Page Adjusting the sampling positions with controlled stimulus Page State Display Loading the FS1140 FS1140 Installation and LicensingSetting up the FS1140 DDR2 Tool Statistics Timing Analysis ExportPage Appendix Header 1 CommandDP16P/ CLK CK0 Header 2 Command NC3 Header 3 Write DQ9 Header 4 Write Ground D13 DQ22 20K ohm to D14 DQ18 D15 DQ23 Header 5 Write CB0 CB1 20K ohm to Ground D13 No connection D14 D15 Header 6 Write DM5DQS14 Header 7 -Write 20K ohm to Ground D13 DQ50 D14 DQ55 D15 DQ51 Header 8 Write SDA Header 12 Read Duplicates only data signals 20K ohm to Ground D15 No connection Header 10 Read Duplicates only data signals DP16P/ CLK CB7 Header 11 Read Duplicates only data signals DP16P/ CLK RAS Header 9 Read Duplicates only data signals DP16P/ CLK CK2 Header 13 Read Duplicates only data signals Ground D13 DQ50 20K ohm to D14 DQ55 D15 DQ51
Top Page Image Contents