Agilent Technologies FS2334 user manual Setting up the FS1140 DDR2 Tool

Page 28

Setting up the FS1140 DDR2 Tool

The FS1140 DDR2 tool has to be set-up with the DDR2 bus parameters being used on the target system in order to insure proper decode of the captured logic analyzer trace file. Selecting the “Set- up” button from the window provides a form for this information. There are 4 DDR2 DIMM bus parameters that have to be set in order for the FS1140 tool to work properly. These are the same as the Preferences described on page 21.

28

Image 28

Contents DDR2 Dimm High Speed Probe FS2334 Product Warranty Appendix For Technical Support For Sales and Marketing SupportProduct Warranty Exclusive RemediesSoftware License Agreement Introduction DefinitionsFS2334 Probe Description Probe Technical Feature SummaryProbe Components Signal Threshold Voltage Settings Signal Assignments on Probe PodsConnecting the DDR2 Probe to the Logic Analyzer Test Points Signal Isolation on the Probe Connecting to your Target SystemBuffered signals on the probe Write state analysis Page Software Requirements Setting up the 169xx Analyzer169xx Licensing Offline Analysis Page TimingZoom Analysis Decoding DDR CommandsTaking a Trace, Triggering, and Seeing Measurement Results State Analysis OverviewState Analysis Operation Read and Write at 667MT/s or slower Process for setting sampling positions at speeds of 800MT/s State analysis calibration procedure Page Page Adjusting the sampling positions with controlled stimulus Page State Display FS1140 Installation and Licensing Loading the FS1140Setting up the FS1140 DDR2 Tool Statistics Export Timing AnalysisPage Header 1 Command AppendixDP16P/ CLK CK0 Header 2 Command NC3 Header 3 Write DQ9 Header 4 Write Ground D13 DQ22 20K ohm to D14 DQ18 D15 DQ23 Header 5 Write CB0 CB1 20K ohm to Ground D13 No connection D14 D15 Header 6 Write DM5DQS14 Header 7 -Write 20K ohm to Ground D13 DQ50 D14 DQ55 D15 DQ51 Header 8 Write SDA Header 12 Read Duplicates only data signals 20K ohm to Ground D15 No connection Header 10 Read Duplicates only data signals DP16P/ CLK CB7 Header 11 Read Duplicates only data signals DP16P/ CLK RAS Header 9 Read Duplicates only data signals DP16P/ CLK CK2 Header 13 Read Duplicates only data signals Ground D13 DQ50 20K ohm to D14 DQ55 D15 DQ51