Braun manual Vista basic Instructions for Use 950787 Rev H 02/03

Page 2

The CE mark confirms compliance with the “Council Directive on Medical Products 93/42/EEC” dated the 14th of June, 1993.

B. Braun Melsungen AG

RESPONSIBILITY OF MANUFACTURER Manufacturer, assembly, and installation personnel or instructors can only be held responsible for any effects on device safety, reliability, and performance if

♦Installation, expansion work, readjustments, modifications, or repairs are carried out by personnel authorized by the above,

♦The electrical wiring for AC power satisfies the requirements of VDE 0100, 0107, and/or the IEC publications, or regional and/or national variations,

♦The device is operated in line with the Instructions for Use, and

♦Regular technical inspections (Preventative Maintenance) are carried out every 2 years as outlined in the Service Manual.

INSPECTION ON DELIVERY Despite careful packaging, the risk of transport damage cannot be entirely excluded. Upon delivery, please check that nothing is missing. Do not use a damaged device! If the device is damaged, contact the Service Department. See “Maintenance, Storage, & Service.”

Vista™ basic Instructions for Use 950787 Rev H 02/03

Packaging: The pump packaging is reusable.

Package Contents: Vista basic Infusion Pump, drop sensor, power cable, pole clamp, Instructions for Use.

1/25

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Vista basic Instructions for UseVista basic Instructions for Use 950787 Rev H 02/03 Vista basic Contents Vista basic Instructions for Use 950787 Rev H 02/03 Safety Standard Introduction Door Open Button Aluminum Case Function KeysTurn on the Pump Preparing the InfusionPrepare the Pump Load the SetRate and Vtbd Volume To Be Delivered Continuous ModeContinuous Mode YESRate and Time To Change the Rate While InfusingVtbd and Time To Change the RateKeep Vein Open Rate Information KEYPiggyback OptionsPiggyback To Review or Change Ramp/Taper Mode Data Piggyback, Ramp/Taper ModeRAMP/TAPER Mode To Exit PiggybackTo Exit Ramp/Taper Mode Ramp/Taper ModeTo Clear Ramp/Taper Mode Fast TaperTo Review or Change Program Mode data Program ModeProgram Mode To Clear Program ModeTo Exit Delay a Mode Delay a ModeDelay a Mode To Review Data During Infusion Dosage CalculationDosage Calculation To Exit Dosage CalculationInterval Bolus Intermittent Mode Bolus ModeBolus Without Entering a Volume Standby Total InfusedTo Clear the Total Infused To Exit Standby FunctionDrop Sensor Battery CapacityOcclusion Pressure To Turn On the Drop SensorTo Turn Off Data Lock Data Lock, Contrast SelectionData Lock Contrast SelectionLoudness Adjust Clock, LoudnessAdjust Clock Alarms Alarm Possible Cause ActionAC and 12 AC, 12 V, BATTERY, & CC InterfaceBattery Operation CC InterfaceService MAINTENANCE, STORAGE, & ServiceMaintenance StorageSpecifications 2001 B. Braun Medical Inc
Top Page Image Contents