Mitel 5320 Using a Cordless Device as a Remote Control, Using the Mute Key on a Cordless Device

Page 100

Cordless Devices

Using a Cordless Device as a Remote Control

When not being used to talk, the cordless handset/headset buttons can act as a remote control device to change display contrast, volume, and mute settings on the host IP phone. For example, in a remote handsfree conference setting, you can use the Volume and Mute buttons on a cordless device to adjust speaker levels and mute the microphone on an IP phone that is not within his reach.

Using the Mute Key on a Cordless Device

When using a Mitel-branded cordless accessory, the Mute key on the cordless accessory is synchronized with the Mute key on your phone. Pressing the Mute key on either the phone or the accessory also controls the Mute function on the other device.

There is no synchronization between a third-party Bluetooth headset mute control (if one is available) and your phone Mute key. The procedure for muting a Bluetooth headset depends on the headset manufacturer. Some headsets have a mute control and some do not. You can, however, use the Mute key on your phone to mute a conversation on any type of Bluetooth headset.

Using the Volume Keys on Cordless Device

When using a Mitel-branded cordless accessory, the Volume keys on the cordless accessory are synchronized with the Volume keys on your phone. Pressing the Volume keys on either the phone or the accessory also controls the Volume function on the other device.

When using a third-party Bluetooth headset, the volume control on the headset (if one is available) is not synchronized with the Volume keys on your phone. Pressing the Volume keys on the phone does not change the headset volume.

Alerting Tones and LEDs

The cordless devices provide the following alerting tones:

Feature

Function

 

 

Mute key on cordless device ON/OFF

Two-pitch tone occurs immediately. Reminder tone

 

occurs 30 seconds after activation and then

 

regularly until deactivated

 

 

Mute key on phone ON/OFF

No immediate tone. Reminder tone occurs 30

 

seconds after activation and then regularly until

 

deactivated.

 

 

Low battery (within 10 minutes left)

Three beeps and 20 second pause repeated three

 

times.

 

 

Low battery (within 2 minutes left)

Three rapid beeps and 1.5 second pause repeated

 

three times.

 

 

Out of range

Repetitive 3-pitch tone until you are back in range.

 

 

NOTES

Audio indications are heard in the handset only when it is in use, and may interrupt voice transmission.

If you are out of range for more than 10 seconds, any call that is in progress is dropped and not recovered.

Page 84

Mitel® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013

Page 99 Page 101
Image 100
Page 99 Page 101
Contents Communications Platform Page Feature Buttons Commonly Used Feature CodesFeature Code 5320/5330/5340 IP Phone Quick Reference GuideUsing Do-Not-Disturb Answering CallsPlacing Emergency Calls Placing Internal Intercom CallsTechpubs@mitel.com Important Safety Instructions and Precautions Safety NoticesMaintenance and Repair Programming Emergency NumbersSoftware Updates Power RequirementsProduct Disposal Instructions Phone Usage Directive 1999/5/EC of the European Page Contents Using Automatic Trunk Answer Placing Calls Answering and Placing CallsCall Features Using the Directory Using Account CodesUsing Meet-Me Conferencing MessagesTroubleshooting Hunt GroupsCordless Devices IndexPage Welcome About Your IP Phone5320/5330 IP Phone Features IP PhoneIP Phone Features Phone Feature Descriptions Ring/Message IndicatorHandset DisplayDialpad Buttons Programmable Buttons Menu Buttons 5340 IP Phones onlyNavigation Page Buttons External SpeakerPhone Signals Comfort and Safety TipsUsing a Headset Viewing the Phone InformationTo view system information To connect and activate the headsetUsing the 5310 IP Conference Unit Accessing/Exiting the Conference Controller ApplicationAdjusting the Conference Unit Volume Turning the Conference Unit On and OffPlacing the Conference Unit in Presentation Mode To enable/disable Presentation ModeMuting the Conference Unit To mute the Conference UnitUsing the Line Interface Module LIM Making and Answering Calls Using the Analog Button To make a call using the Analog lineTo answer a Call using the analog line To end a current call when an incoming analog call arrivesMaking and Answering Calls Using the Failover Mode Page Adjusting the Viewing Angle To adjust the viewing angleAdjusting the Display Contrast and Brightness Changing Volume LevelsChanging the Ring Tone Changing the Language To change the display/prompt languageTo change the text size on a display Changing the Text Size on the DisplayPress Large Text or Small Text Using the Screen Saver To configure the screen saver on your IP PhoneTo wake your IP phone from screen saver mode Viewing Call History Viewing Call HistoryTo view your call history Deleting Call Records Reviewing Call Record IconsTo delete an individual call record Press Delete Log Entry To delete all calls by typeCutomizing Your Contact List Adding Names to Your Contact ListEditing Your Contact List Dialing from Your Contact ListTo play the beep, press Play button beep or Play error beep To adjust the volume of the audio feedbackSpecifying Audio Feedback Options Using the Dialpad Buttons to Enter Characters To use the dialpad to enter charactersPersonalizing Your Phone Lamp Signals Description Using Programmable ButtonsTo program a button Default Access Codes Default Feature CodesOutside Line Access Codes Extension NumbersAnswer Ringing Call 351 Automatic IC Access On/Off Message View Messages Resetting Programmable Buttons Resetting the IP Phone to the Default SettingsListening to Background Music Viewing Button AssignmentsSwitching Keymaps To switch between keymaps when your IP phone is idleTo switch between keymaps during a call Activating Door RelayAnswering Calls Using Automatic Call AccessAnswering Waiting Calls Using Automatic Trunk Answer Redirecting CallsTo redirect calls To use Automatic Trunk AnswerPlacing Calls Placing Emergency Calls using the LIM LinePlacing Emergency Calls Placing Internal Calls Using Camp-onRequesting a Callback Queuing the Phone Placing External Calls Redialing a NumberTo place an external call To use RedialUsing Speed Dial Using System Speed DialUsing Station Speed Dial Storing Station Speed-Dial NumbersDialing Station Speed-Dial Numbers Deleting Station Speed-Dial EntriesTo dial a Station Speed-Dial number To delete a Station Speed-Dial entryTo program a Station Speed-Dial button Assigning Speed-Dial Numbers to Programmable ButtonsTo program a System Speed-Dial button Using the Directory Button Characters RepresentedUsing Account Codes To search for a directory name or featureTo disable the code To enter an optional account codeUsing Ring Intercom Always Using Handsfree ModeUsing Mute Placing Calls On Hold Entering a HookflashUsing Reverse Transfer Transferring CallsTransferring Calls to Other Extensions Transferring Calls to External NumbersViewing Your System Information Viewing Caller ID InformationTo display your user information and the date and time To show the outside party’s name/numberManual Call Forwarding Forwarding CallsSystem Forwarding Using Dynamic Extension Express To enable Dynamic Extension ExpressTo disable Dynamic Extension Express To answer a call routed to your mobile or home phoneUsing the Handoff Push/Pull Feature To use the Dynamic Extension Express Handoff push featureTo use the Dynamic Extension Express Handoff pull feature To cancel the Dynamic Extension Express Handoff featureReceiving Message Waiting Indications Callback Auto Attendant NumberPlacing Ad Hoc Conference Calls Adding a Conference PartyTransferring a Conference Dropping Out of a ConferenceEnding a Conference and Placing all Parties on Hold To toggle between the held callersUsing Meet-Me Conferencing Access CodesSetting Up a Meet-Me Conference To set up a Meet-Me Conference using a personal access codeJoining a Meet-Me Conference Dropping Out of a Meet-Me ConferencePutting a Meet-Me Conference on Hold Transferring a Meet-Me ConferenceUsing Record-A-Call Using Group ListenTo use Record-A-Call To stop Record-A-CallUsing Call Logging To use Call LoggingTo return a call or redial a number listed in a call log To delete individual call log entriesUsing Secondary Extension Buttons To log on to a Hot Desk-enabled base phone Using Hot DeskingTo log off of a Hot Desk session Changing Your Station Passcode Using the Configuration AssistantTo change your station passcode Accessing the Configuration Assistant Changing the Dynamic Extension Express SettingsTo access the Configuration Assistant To change the DDE settings using Configuration AssistantChanging the Manual Call Forwarding Settings Changing the DND SettingsTo change the DND settings using Configuration Assistant To create a new Meet-Me Conference access code Managing Meet-Me Conferencing Access CodesTo delete an existing Meet-Me Conference access code Using Remote Programming To enable Dynamic Extension Express using Remote ProgrammingTo turn on DND using Remote Programming To turn off DND using Remote ProgrammingTo turn on Manual Call Forwarding using Remote Programming To turn off Call Forwarding using Remote ProgrammingTo change your station passcode using Remote Programming Page Messages Leaving Messages at Other ExtensionsViewing and Responding to Messages Canceling Messages Left at Other ExtensionsDeleting Waiting Inter-Station Messages Using Do-Not-Disturb DND Code Default Mes New Message Default Message SageTo turn on DND To turn off DNDUsing Reminder Messages Code Default New MessageTo cancel all Reminder message requests To set a Reminder messagePaging Other System Users Enabling or Disabling the Page FeaturePlacing a Page Announcement Page Logging in to ACD Hunt Groups To log in to one or more ACD hunt groupsStopping the ACD Hunt Group Wrap-up Timer To stop the wrap-up timerLogging out of ACD Hunt Groups To log out of one or more ACD hunt groupOther Hunt Group Features Requesting Agent HelpDiverting Hunt Group Calls To use Agent HelpHunt Group Supervisor Features Accepting or Rejecting Agent Help CallsMonitoring Calls Stealing Hunt Group CallsUsing Barge-In To monitor and/or barge in on a callPage Cordless Devices Feature Function Cordless Module Handset and Headset CombinationsPairing the Cordless Module and Devices Pairing a Bluetooth Accessory with a Bluetooth ModuleTo pair a Bluetooth accessory To pair a Dect cordless deviceTo unpair a cordless device Cordless Module LED IndicatorsBlue LED Function Using a Cordless Device as a Remote Control Using the Mute Key on a Cordless DeviceUsing the Volume Keys on Cordless Device Alerting Tones and LEDsLow Battery Level Using the Mitel Cordless Handset Cordless Handset FeaturesAnswering Calls Hanging UpCordless Handset Alerting Tones and LEDs To hang upLED Color LED State Indicates Using the Mitel Dect Cordless Headset Cordless Headset FeaturesCordless Headset Alerting Tones and LEDs Answer a Call Using a Bluetooth HeadsetHang Up Using the Cordless Devices Application Enabling/Disabling Auto-Connect on a Bluetooth HeadsetConnecting/Disconnecting a Bluetooth Headset Low Battery LevelEditing a Bluetooth Headset Name To edit a nameCordless Devices Contact Information Error MessagesMessage Reason Troubleshooting Tips Problem Possible SolutionTo Handoff
Related manuals
Manual 26 pages 17 Kb Manual 97 pages 48.5 Kb Manual 54 pages 38.29 Kb Manual 58 pages 63.27 Kb Manual 66 pages 35.7 Kb Manual 1 pages 6.54 Kb Manual 60 pages 19.02 Kb Manual 1 pages 59.96 Kb Manual 58 pages 24.73 Kb

5330, 5320, 5340 specifications

The Mitel 5330 is a sophisticated IP phone designed to meet the communications needs of modern businesses. Offering a combination of advanced technology and user-friendly features, the Mitel 5330 is ideal for office environments where high-quality communication is essential.

At its core, the Mitel 5330 leverages Voice over Internet Protocol (VoIP) technology, allowing for seamless connectivity over the internet. This technology enhances voice clarity and reduces communication costs by utilizing existing network infrastructure instead of traditional phone systems. The phone utilizes the SIP (Session Initiation Protocol) standard, ensuring interoperability with various VoIP platforms.

One of the standout features of the Mitel 5330 is its extensive display. With a backlit graphical interface, users can easily navigate through menus and access information quickly. The phone typically includes a high-definition color display that enhances visibility, making it convenient for users to manage calls and access features.

The Mitel 5330 is equipped with programmable keys that enhance efficiency, allowing users to create shortcuts for frequently used functions, such as speed dialling or call transfer. This customizability allows employees to tailor the phone to their specific needs, increasing productivity in the workplace.

Additionally, the Mitel 5330 supports a wide range of call management features, including call hold, call forwarding, and three-way calling. These functionalities streamline communication processes, enabling teams to work collaboratively and efficiently. The phone also supports voicemail integration, ensuring that users never miss an important message.

Built-in audio technologies, such as wideband audio and high-definition sound quality, contribute to crystal-clear voice communication, minimizing misunderstandings during calls. Furthermore, the phone often includes a hands-free speakerphone option, enhancing flexibility for users who may need to multitask while conversing.

In terms of connectivity, the Mitel 5330 typically features various ports, including Ethernet connections, allowing for easy integration into existing network setups. Its robust architecture ensures reliability, even in demanding office environments.

Overall, the Mitel 5330 represents a powerful solution for businesses seeking a reliable, feature-rich IP phone. Its combination of advanced technology, user-friendly features, and high call quality makes it an excellent choice for organizations looking to improve their communication capabilities. With its focus on efficiency and performance, the Mitel 5330 can significantly enhance workplace productivity.
Top Page Image Contents