ClearSounds CSC50 user manual Viewing Incoming Calls, Battery Low Indicator

Battery Low Indicator

The battery power level icon is display on the screen when the AC adapter is not plugged in or during a power outage. This will let you see the status of battery power. As the batteries drain, the lines on the icon will disappear (See figure #32). When your AC adapter is plugged in or power is restored, you will see a plug icon rather than a battery icon (See figure #33).

Figure #30	Figure #31	Figure #32	Figure #33
Total & New Calls	No Call	Battery Power Indicator	AC Power Indicator

Message Waiting

If you have Voice Mail Service from your local phone company, your CSC50 Phone will display MESSAGE WAITING if a recorded message has been left (See figure #34). The Message Indicator light (See page #28) will flash until the message is retrieved.

Call Counter

Figure #34 – Message Waiting

Viewing Incoming Calls

If you subscribe to Caller ID service with your local phone service provider, this phone stores all incoming calls with valid Caller ID information in the call history. Your LCD screen will display the time and date, the caller’s phone number and name (if they are sent with the call) as well as a count number (See figure #35). New calls are assigned a number from 1 to 99. The most recent call will have the highest number. The call history numbers appear in the upper right hand corner next to the time and date. New (un-reviewed) call information shows NEW in the display. With each new call it will automatically turn on the “New Calls / Message Waiting Indicator”, which is a small red light located on the lower right-side of the phone’s visual ringer (next to the envelope icon).

NOTE: You must follow the instructions in “Set Area Code / LDS (Long Distance Service) Code” for your phone to properly recognize and dial calls out of the Caller ID stored calls (see page #27). You must program your area code so your phone can properly recognize and dial calls.

23