ClearSounds CSC50 user manual Using Audio and Telephone Headset Accessory Jacks

Receiving/Answering A Call Using The Speakerphone

1. Press the “SPKR” (speakerphone) button while the phone is ringing to answer.

2. Adjust the volume to fit your need (Same as above).

3. On completion of the call, press the “SPKR” button again.

Switch between Handset and Speakerphone

While on a handset call, press the “SPKR” button and replace the handset in the cradle. While on a speakerphone call, lift the handset.

USING AUDIO AND TELEPHONE HEADSET ACCESSORY JACKS

Your CSC50 Amplified Phone is equipped with both an Audio and Telephone Headset Jack, providing total flexibility and multi-functionality(See figure #22). Both the Audio & Headset jacks are amplified, allowing you to adjust both the tone and volume. (See pages 19-21 for instructions on the amplification features.) These jacks accommodate a variety of ac- cessories including Neckloops, Headphones, Earbuds, Silhouettes, Cellular Accessories and Cochlear Patchcords*.

*Caution: Before plugging any cord into your Cochlear processor, you should consult with your implant manufacturer.

Audio/Neckloop Jack

Using the 3.5mm stereo/mono jack allows you to listen through your Neckloop or Headset while speaking into the handset or speakerphone.

Telephone Headset Jack

Using the 2.5mm stereo jack that can accommodate many hands-free headsets allows for total hands-free operation as you listen and speak through your hands-free headset.

Making A Call:

1.Plug your Neckloop, Headphones, Headset or other jack accessory into the Audio/

Neckloop Jack or Headset Jack.

2.Press the (headset) button for dial tone (See figure #23).

3.Dial the number and wait for someone to answer.

18