Call Forwarding
Step by Step
C
F:
:or ;or <
D L
C
G: L
Call Forwarding
Using Variable Call Forwarding
You can immediately forward internal or external calls to different internal or external telephones (destinations). (External destinations require special configuration in the system).
Special features must be taken into consider- ation if your telephone operates with HiPath AllServe (system networking via PC network)
Æpage 54!
Lift the handset.
Enter the code.
Enter the line type you wish to use:
1 = all calls, 2 = external calls only, 3 = internal calls only
Enter the destination number (without the external code).
Deactivating call forwarding:
Lift the handset.
Enter the code.
When call forwarding is active, a special dial tone sounds when you lift the handset.
If DID DTMF is active (contact System Support), you can also forward calls to this destination. Destinations: fax = 870, DID = 871,
fax DID = 872.
34