BT 500 manual Phone settings, Dim mode

Page 34

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

34Phone settings

3.Handset Settings is highlighted, press OK.

4.Press UP or DOWN to highlight Register HS.

The default PIN code is 0000.	5. Enter your 4 digit System PIN code, and press OK.
Press to exit and return to standby	Registering … is displayed.
at any time.
	At the base:

6.Press and hold , until you hear a beep tone. Release the button and the phone will remain in registration mode for 60 seconds while the handset attempts to register with the base.

When registration is successful, the new handset will automatically be allocated the next available handset number. This number will be shown in the handset display when in standby mode.

When set to On, the handset uses more power and so the talk and standby times will be reduced.

Dim mode

With Dim mode set to on, after a pre-set period of inactivity, the display backlight will reduce to 10%.

With Dim mode set to off, the display will go completely blank after the pre-set period of inactivity.

When you press a keypad button, the display backlight will come on as normal.

1.Press Menu to open the main menu.

2.Use the NAVIGATION buttons to highlight the symbol and press OK to select.

If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com

Image 34

Contents User Guide Welcome… Need help? Got everything?This guide This guide Sound settingsPhone settings Answering machineCaller Display Using additional handsets Text messaging General informationGetting started Setting upSignal strength LocationGetting started Battery low warningBattery performance Set the date and timePlug the other end into the mains wall socket and switch Clock Setting is displayed, press OK to selectCurrent time and date setting is displayed. Enter 2 digits For the hour and 2 for the minute e.g. for 2.15pm, enterGetting to know your phone Handset buttonsRinger off Battery levelsAlarm clock HandsetStandby display Range Handset name and number Time Battery Date PhonebookGetting to know your phone Answering machine and base buttonsStoring a name in the phonebook, see Following table shows you where each letterCharacter map Navigating the menusMenu map Make an external call Using the phoneSwitch the handset power on/off Preparatory dialling pre-dialPress UP to increase or Down to decrease the volume Using the phoneEarpiece/receiver volume Receive a callHandsfree Secrecy muteMake a call in handsfree Answer a call in handsfree Switch to handsfree during a callRedial list Call a number from the redial listKeypad lock Copy a number from the redial list to the phonebookPaging handsets Name and number phonebookEntering names Store a name and numberDial a number Writing tipsEdit an entry Delete an entry or all entriesCopy an entry to another handset Save a phonebook number to a quick dial keyDial a quickdial number Copy SIM card contacts to the phonebookPress Option soft key then use UP or Down to display Copy Enter your SIM Card PIN. Enter your 4-digit SIM PIN codeWallpaper Display settingsContrast Set the alarm Alarm and time settingsSet the time and date Alarm and time settings Silence the alarmHandset earpiece/speaker volume Sound settingsExternal call ringer melody and volume Melody is highlighted, press OK to select Sound settingsInternal call ringer melody and volume Press OK to confirm To exit and return to standbyBase ringer melody and volume Handset tones Auto answer Phone settingsHandset settings Register a handsetPhone settings Dim modeReset your handset Handset nameRoom monitor Base settings System PIN codeReset your base De-register a handsetRecall time Pause timeCall log type Auto-delete Answering machine Switch the answering machine ON/OFF Answering machine settings via the handsetAnswer delay Automatic for the ‘time saver’ option Press UP or Down to select the answer delay setting youAnswering machine Require and select OK Press To exit and return to standbyTime stamp on/off Monitoring/call screeningRecording quality Default setting is ‘standard’You can select either standard or high quality recording. Answer and Record Outgoing messagesRecord your own outgoing message Answer OnlySelect the outgoing message answer mode Check your outgoing messageListening to your messages Record a memo Memory fullAnswering machine settings via the base Check/delete the OGMRecord a new outgoing message Change the remote access PIN code Remote accessStandby mode Press and hold to delete all messages Standby mode, press HoldSwitch remote control On/Off Operating your answering machine remotely Switch your answering machine on remotelyCheck for messages remotely Time saverPlay new messages Switch answering machine on/offPlay all messages Pause playbackCalls log BT Caller DisplayView and dial from the Calls log Press or to dial a displayed number BT Caller DisplayCopy a Calls log number to the phonebook Delete a/all Calls log numbers Cost of the fixed line service Subscribe to the text messaging serviceText messaging Send a text message Text messagingSent messages are stored in the Outbox Received messages are stored in the Inbox Entering textSaved messages are stored in the Drafts box Your BT Verve 500 can store up to 30 messagesReceiving and reading text messages See page 13 for the complete character mapOr, select to open the phonebook and scroll UP or Down Press UP/DOWN/LEFT/RIGHT toConfirm and send Back to cancelTo scroll and display the name/number you want. Press Receiving a call while writing a textText messaging Delete messages stored in the Drafts box Read, edit, send or delete messages stored in the Outbox Memory Full and Delete Messages alternatelyService Centre numbers Numbers StoredCenter 2 and press OK Select an SMS Center to send/receive from Internal calls Using additional handsetsReceiving an external call while on an internal call Transferring calls Way CallsHelp Help No Caller Display number/name displayed Cannot access your messages from another phoneAnswering machine messages have the wrong date and time Cannot register a handset to a baseCannot send text Possible problems with text messagingText messages cannot be sent and screen displays Failed Customer HelplineFurther help and advice for text queries on BT lines Cannot receive textBilling enquiries General sales enquiriesRefer to the telephone number shown on your telephone bill You keep hearing an error beep Press OK. Number is displayed. Enter 00000 and press OKGeneral information Cleaning General informationGuarantee Technical information For your recordsConnecting to a switchboard Ofﬁces worldwide

Related manuals

Manual 34 pages 34.94 Kb