BT 500 manual Base settings, System PIN code

Page 37

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

Phone settings	37

7.Press or on the other handset to start monitoring. If the ‘listening’ handset detects any noise it will ring the other handset.

Base settings

System PIN code

Your BT Verve 500 has a system PIN code which you will need to change various settings on your phone. The default PIN code is 0000. You may want to change this to prevent unauthorised changes to your settings.

1.Press Menu to open the main menu.

2.Use the NAVIGATION buttons to highlight the symbol and press OK to select.

3.Press DOWN to highlight Base Settings and press OK.

4.Change PIN is highlighted, press OK.

5.Enter the old PIN number (default 0000) and press OK.

6.Enter New PIN is displayed. Enter a new 4 digit PIN code and select the OK option.

7.Re-enter PIN is displayed. Re-enter the new 4 digit PIN code and select the OK option to confirm.

8.Press to exit and return to standby.

For security reasons, when you enter each digit of the PIN code it will be displayed as a *.

Press Clear to delete an incorrect digit.

If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com

Image 37

Contents User Guide Welcome… Got everything? Need help?This guide Phone settings Sound settingsThis guide Answering machineText messaging General information Caller Display Using additional handsetsSignal strength Setting upGetting started LocationBattery performance Battery low warningGetting started Set the date and timeCurrent time and date setting is displayed. Enter 2 digits Clock Setting is displayed, press OK to selectPlug the other end into the mains wall socket and switch For the hour and 2 for the minute e.g. for 2.15pm, enterHandset buttons Getting to know your phoneAlarm clock Battery levelsRinger off HandsetGetting to know your phone Range Handset name and number Time Battery Date PhonebookStandby display Answering machine and base buttonsCharacter map Following table shows you where each letterStoring a name in the phonebook, see Navigating the menusMenu map Switch the handset power on/off Using the phoneMake an external call Preparatory dialling pre-dialEarpiece/receiver volume Using the phonePress UP to increase or Down to decrease the volume Receive a callHandsfree Secrecy muteMake a call in handsfree Redial list Switch to handsfree during a callAnswer a call in handsfree Call a number from the redial listCopy a number from the redial list to the phonebook Keypad lockName and number phonebook Paging handsetsDial a number Store a name and numberEntering names Writing tipsDelete an entry or all entries Edit an entrySave a phonebook number to a quick dial key Copy an entry to another handsetCopy SIM card contacts to the phonebook Dial a quickdial numberEnter your SIM Card PIN. Enter your 4-digit SIM PIN code Press Option soft key then use UP or Down to display CopyWallpaper Display settingsContrast Set the alarm Alarm and time settingsSet the time and date Silence the alarm Alarm and time settingsHandset earpiece/speaker volume Sound settingsExternal call ringer melody and volume Internal call ringer melody and volume Sound settingsMelody is highlighted, press OK to select Press OK to confirm To exit and return to standbyBase ringer melody and volume Handset tones Handset settings Phone settingsAuto answer Register a handsetDim mode Phone settingsHandset name Reset your handsetRoom monitor System PIN code Base settingsDe-register a handset Reset your basePause time Recall timeCall log type Auto-delete Answering machine Switch the answering machine ON/OFF Answering machine settings via the handsetAnswer delay Answering machine Press UP or Down to select the answer delay setting youAutomatic for the ‘time saver’ option Require and select OK Press To exit and return to standbyMonitoring/call screening Time stamp on/offRecording quality Default setting is ‘standard’You can select either standard or high quality recording. Record your own outgoing message Outgoing messagesAnswer and Record Answer OnlyCheck your outgoing message Select the outgoing message answer modeListening to your messages Memory full Record a memoCheck/delete the OGM Answering machine settings via the baseRecord a new outgoing message Standby mode Press and hold to delete all messages Remote accessChange the remote access PIN code Standby mode, press HoldSwitch remote control On/Off Check for messages remotely Switch your answering machine on remotelyOperating your answering machine remotely Time saverPlay all messages Switch answering machine on/offPlay new messages Pause playbackCalls log BT Caller DisplayView and dial from the Calls log Press or to dial a displayed number BT Caller DisplayCopy a Calls log number to the phonebook Delete a/all Calls log numbers Cost of the fixed line service Subscribe to the text messaging serviceText messaging Send a text message Text messagingSent messages are stored in the Outbox Saved messages are stored in the Drafts box Entering textReceived messages are stored in the Inbox Your BT Verve 500 can store up to 30 messagesSee page 13 for the complete character map Receiving and reading text messagesPress UP/DOWN/LEFT/RIGHT to Or, select to open the phonebook and scroll UP or DownTo scroll and display the name/number you want. Press Back to cancelConfirm and send Receiving a call while writing a textText messaging Delete messages stored in the Drafts box Memory Full and Delete Messages alternately Read, edit, send or delete messages stored in the OutboxNumbers Stored Service Centre numbersCenter 2 and press OK Select an SMS Center to send/receive from Internal calls Using additional handsetsReceiving an external call while on an internal call Way Calls Transferring callsHelp Help Answering machine messages have the wrong date and time Cannot access your messages from another phoneNo Caller Display number/name displayed Cannot register a handset to a baseText messages cannot be sent and screen displays Failed Possible problems with text messagingCannot send text Customer HelplineCannot receive text Further help and advice for text queries on BT linesBilling enquiries General sales enquiriesRefer to the telephone number shown on your telephone bill Press OK. Number is displayed. Enter 00000 and press OK You keep hearing an error beepGeneral information General information CleaningGuarantee For your records Technical informationConnecting to a switchboard Ofﬁces worldwide

Related manuals

Manual 34 pages 34.94 Kb