Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
Phone settings | 35 |
|
|
3. Handset Settings is highlighted, press OK.
4.Press UP or DOWN to highlight Dim Mode.
5.Press the right soft key to select either On or Off.
6.Press to exit and return to standby.
If Dim Mode is set to On, a ✓will be displayed alongside Dim Mode.
Handset name
If you are using more than one handset with your BT Verve 500 base, you can give each handset a personalised name to easily distinguish between the handsets. The maximum number of characters is 12.
1.Press Menu to open the main menu.
2.Use the NAVIGATION buttons to highlight the symbol and press OK to select.
3.Handset Settings is highlighted, press OK.
4.Press UP or DOWN to highlight Handset Name and press OK.
5.Enter a name using the keypad and press OK to confirm.
6.Press to exit and return to standby.
Reset your handset
You can reset your BT Verve 500 handset to the default (original) settings.
To delete an incorrect character/digit
press soft key.
To restore the default name (Handset 1), delete the current name and save a blank entry. When the handset returns to standby mode, the default name will be displayed.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com