BT 500 manual Getting started, Set the date and time, Talk/Standby time, Battery low warning

Page 8

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

8

Getting started

 

 

 

 

 

 

 

 

 

Talk/Standby time

 

Insert the MT Li-ion 3.7V 600mAh rechargeable battery supplied

 

In ideal conditions, fully charged

 

by plugging the small battery connector plug into the socket

 

handset batteries should give about

 

12 hours talk time or 120 hours

inside the battery compartment. Make sure the battery wires are

 

standby time on a single charge. The

tucked in and then slide the battery compartment cover back on.

 

base must remain plugged in to the

 

mains and switched on at all times.

 

 

 

Note that a new battery pack will not

 

 

 

reach full capacity until it has been in

 

 

 

normal use for several days.

 

 

 

 

Battery low warning

 

 

 

 

If the handset has 15 minutes or less

 

 

 

talk-time remaining the

symbol

 

 

 

will flash in the display. If you are on a

 

 

 

call, you will hear 2 warning beeps

 

 

 

every 30 seconds to alert you. You

 

 

 

will need to recharge the handset

3. Place the handset on the base to charge for at least 24 hours.

 

before you can use it again.

 

 

If the battery is completely flat, it will

You will hear a beep and the handset display will come on

 

briefly to confirm the handset is sitting correctly.

 

take several minutes to become active

 

again after being placed on the

4. After 24 hours, plug one end of the telephone line cord into

 

charger. You will need to charge the

 

batteries for 12 hours before they are

the socket on the back of the base and the other end into the

 

fully charged.

 

 

 

telephone wall socket.

 

 

Battery performance

 

 

 

 

 

 

 

To keep your battery pack in the best

 

 

 

condition, leave the handset off the

Set the date and time

 

 

base for a few hours at a time.

 

 

Running the battery right down at

We recommend that you set the date and time (as shown

 

least once a week will help it last as

below) so they can be recorded with each answering machine

 

long as possible.

 

 

 

 

message you receive.

 

 

 

 

1. Press Menu to open the main menu. Then use the NAVIGATION

 

 

 

buttons to highlight the

menu and press OK.

If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User Guide Welcome… Need help? Got everything?This guide Sound settings Phone settingsThis guide Answering machineCaller Display Using additional handsets Text messaging General informationSetting up Signal strengthGetting started LocationBattery low warning Battery performanceGetting started Set the date and timeClock Setting is displayed, press OK to select Current time and date setting is displayed. Enter 2 digitsPlug the other end into the mains wall socket and switch For the hour and 2 for the minute e.g. for 2.15pm, enterGetting to know your phone Handset buttonsBattery levels Alarm clockRinger off HandsetRange Handset name and number Time Battery Date Phonebook Getting to know your phoneStandby display Answering machine and base buttonsFollowing table shows you where each letter Character mapStoring a name in the phonebook, see Navigating the menusMenu map Using the phone Switch the handset power on/offMake an external call Preparatory dialling pre-dialUsing the phone Earpiece/receiver volumePress UP to increase or Down to decrease the volume Receive a callMake a call in handsfree Secrecy muteHandsfree Switch to handsfree during a call Redial listAnswer a call in handsfree Call a number from the redial listKeypad lock Copy a number from the redial list to the phonebookPaging handsets Name and number phonebookStore a name and number Dial a numberEntering names Writing tipsEdit an entry Delete an entry or all entriesCopy an entry to another handset Save a phonebook number to a quick dial keyDial a quickdial number Copy SIM card contacts to the phonebookPress Option soft key then use UP or Down to display Copy Enter your SIM Card PIN. Enter your 4-digit SIM PIN codeContrast Display settingsWallpaper Set the time and date Alarm and time settingsSet the alarm Alarm and time settings Silence the alarmExternal call ringer melody and volume Sound settingsHandset earpiece/speaker volume Sound settings Internal call ringer melody and volumeMelody is highlighted, press OK to select Press OK to confirm To exit and return to standbyBase ringer melody and volume Handset tones Phone settings Handset settingsAuto answer Register a handsetPhone settings Dim modeReset your handset Handset nameRoom monitor Base settings System PIN codeReset your base De-register a handsetRecall time Pause timeCall log type Auto-delete Answering machine Answer delay Answering machine settings via the handsetSwitch the answering machine ON/OFF Press UP or Down to select the answer delay setting you Answering machineAutomatic for the ‘time saver’ option Require and select OK Press To exit and return to standbyTime stamp on/off Monitoring/call screeningYou can select either standard or high quality recording. Default setting is ‘standard’Recording quality Outgoing messages Record your own outgoing messageAnswer and Record Answer OnlySelect the outgoing message answer mode Check your outgoing messageListening to your messages Record a memo Memory fullAnswering machine settings via the base Check/delete the OGMRecord a new outgoing message Remote access Standby mode Press and hold to delete all messagesChange the remote access PIN code Standby mode, press HoldSwitch remote control On/Off Switch your answering machine on remotely Check for messages remotelyOperating your answering machine remotely Time saverSwitch answering machine on/off Play all messagesPlay new messages Pause playbackView and dial from the Calls log BT Caller DisplayCalls log Copy a Calls log number to the phonebook BT Caller DisplayPress or to dial a displayed number Delete a/all Calls log numbers Text messaging Subscribe to the text messaging serviceCost of the fixed line service Sent messages are stored in the Outbox Text messagingSend a text message Entering text Saved messages are stored in the Drafts boxReceived messages are stored in the Inbox Your BT Verve 500 can store up to 30 messagesReceiving and reading text messages See page 13 for the complete character mapOr, select to open the phonebook and scroll UP or Down Press UP/DOWN/LEFT/RIGHT toBack to cancel To scroll and display the name/number you want. PressConfirm and send Receiving a call while writing a textText messaging Delete messages stored in the Drafts box Read, edit, send or delete messages stored in the Outbox Memory Full and Delete Messages alternatelyService Centre numbers Numbers StoredCenter 2 and press OK Select an SMS Center to send/receive from Receiving an external call while on an internal call Using additional handsetsInternal calls Transferring calls Way CallsHelp Help Cannot access your messages from another phone Answering machine messages have the wrong date and timeNo Caller Display number/name displayed Cannot register a handset to a basePossible problems with text messaging Text messages cannot be sent and screen displays FailedCannot send text Customer HelplineFurther help and advice for text queries on BT lines Cannot receive textRefer to the telephone number shown on your telephone bill General sales enquiriesBilling enquiries You keep hearing an error beep Press OK. Number is displayed. Enter 00000 and press OKGeneral information Cleaning General informationGuarantee Technical information For your recordsConnecting to a switchboard Offices worldwide
Related manuals
Manual 34 pages 34.94 Kb
Top Page Image Contents