BT 500 manual Using additional handsets, Internal calls

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

72Using additional handsets

Make sure the additional handset is fully charged before attempting to register it.

To register a new handset, see page 33.

To de-register a handset, see page 38.

If you want to register your handset to another GAP compatible base, you will need to de-register it from the BT Verve 500 base first.

During an internal call, the symbol is displayed.

You can press the All soft key to call all handsets.

Press to exit and return to standby at any time.

If you enter an invalid handset number you will hear the error tone.

Receiving an external call while on an internal call

If you are engaged on an internal call and an external caller is trying to get through, you will hear beeps through the earpiece and the caller’s information will be displayed (if you have subscribed to a Caller ID service).

You can use up to 5 GAP compatible handsets with your BT Verve 500 base to extend your phone system without needing to install extension sockets for each new phone.

You must register new handsets to your BT Verve 500 base before they can be used.

Your BT Verve 500 handset can only be registered to one base at a time.

See page 33 for instructions on registering additional handsets.

Internal calls

If you have more than one handset registered to the base, you can make internal calls between two handsets.

1.Press and hold , Internal call and a list of available handset numbers to call is displayed.

2.Use UP or DOWN to highlight the handset number (1-5) you want to call (or enter the handset number using the keypad).

At the called handset, the symbol flashes and the calling handsets number is displayed. The user can press or to answer the call.

3.Either handset can press or or place the handset back on the base/charger to end the call.

If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com