Topcom Butler 4056/4056C
4.31 Setting the handset dialling mode
There are two types of dialling modes:
•DTMF/Tone dialling (the most common)
•Pulse dialling (for older installations)
To change the mode of numeration:
•Press the Programming key 
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
•Press the Up or Down key 
repeatedly until ‘DIAL MODE’ appears on the display.
•Press the Programming key 
•Select ‘TONE’ or ‘PULSE’ by means of the UP and Down key 
•Press the Programming key 
to confirm
5Caller ID/CLIP
(This service only works when you have a Caller ID/Clip subscription. Contact your telephone company).
When you receive a call, the telephone number of the caller, the date and time appears on the handset display. The telephone can receive calls in both FSK and DTMF. If the name is programmed in the Phone Book, the name in the Phone Book is displayed!
The telephone can store 30 calls in a Call List that can be reviewed later. The telephone never stores the same call twice. When the memory is full, the new calls automatically replace the oldest calls in the memory. The symbol 
on the display blinks if the call is not read or not answered. If the Call List is empty and you press the Up key 
, three beep tones will sound.
You can view the information of an incoming call as follows:
•Press the Up key 
. The name (if sent by the network or present in the Phone Book memory) of the caller, the sequence number of the call in the Call List, the date and time of the call appear on the display.
•Press the Down key 
. The telephone number of the caller appears on the display.
5.1Setting the date and time
When you receive an incoming call and the date and time are not sent together with the telephone number, this means that the date and the time will not be shown on the display. By setting the date and time, they will be shown on the display, together with the telephone number, every time a call comes in !
•Press the Programming key 
.
•Press the Up or Down key 
a few times until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•’DATE/TIME’ appears on the display.
•Press the Programming key 
again.
•When ‘YEAR’ appears on the display, enter the 2 last numbers of the year (00=2000, 01=2001, ...) and press the Programming key 
to confirm.
ENGLISH
Topcom Butler 4056/4056C | 25 |