Topcom 4056C manual Topcom warranty, Technical characteristics, Warranty period, Warranty handling

Topcom Butler 4056/4056C

10 Topcom warranty

10.1 Warranty period

The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. The warranty on batteries is limited to 6 months after purchase. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.

The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.

10.2 Warranty handling

A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.

If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge.

Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit.

The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.

10.3 Warranty exclusions

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non- original parts or accessories not recommended by Topcom are not covered by the warranty.

Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused by the use of non-rechargeable batteries is not covered under warranty.

The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation.

No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.

Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by unqualified, non-officially appointed Topcom service centres.

11 Technical characteristics

Standard:	DECT ( Digital Enhanced Cordless Telecommunications )
	GAP ( Generic Access Profile )
Frequency range:	1880 MHZ to 1900 MHz
Number of channels:	120 duplex channels
Modulation:	GFSK
Speech coding:	32 kbit/s
Emission power:	10 mW ( average power per channel )
Range:	300 m in open space /50 m maximum inhouse
Base power supply:	230 V / 50 Hz for the base
Handset Batteries:	2 rechargeable batteries AAA, NiMh 600mAh
Handset autonomy:	100 hours in standby
Talk time:	8 hours
Charging time:	6-8 hours
Normal conditions of use:	+5 °C to +45 °C
Dialling mode:	Pulse / Tone

36 Topcom Butler 4056/4056C