Topcom 4056C manual Memory Full, Remote Operation

Topcom Butler 4056/4056C

8.14.2 Erase all messages

One can also erase all heard messages at one time. This erases only the messages that have already been heard. New messages are not erased.

•Press the delete key for 2 secs.

•The internal voice confirms that the messages have been erased by saying how many new (unheard) messages there are.

8.15 Memory Full

If the memory is full, MEMORY FULL-LED will flash. If the answering machine is turned on and a call comes in, the machine will automatically play OGM 2 (answering machine function without recorded caller message).

When listening to the messages, the internal voice will say that the memory is full and then play back the messages.

•Erase all the messages after listening to them.

•The memory is free again.

8.16 Remote Operation

The answering machine can only be operated remotely using a tough-tone phone (DTMF tone selection system).

•Call your machine.

•The answering machine picks up the line, you hear the outgoing message and a beep.

•After the beep, slowly dial the VIP code (default 321).

•You will hear two short beeps for confirmation.

•Enter the next codes to use the desired function:

8.16.1 Listening to Messages

•Press ‘2’ (listen to messages). The answer machine will play the messages.

During playback, you have the following options:

•Press ‘2’ to stop playback.

•Press ‘2’ to restart playback.

•Press ‘3’ to go to the next message.

•Press ‘1 1' to go to the previous message.

•Press ‘1’ to repeat the current message.

•Press ‘6’ to stop playback.

•Press ‘7’ to erase the current message.

8.16.2 Erasing All Old Messages

After listening to all messages, press ‘0’ to erase all messages.

8.16.3 Playing Outgoing Message

Press ‘4’ to play the current outgoing message.

ENGLISH

Topcom Butler 4056/4056C 33