Verizon DMS 100, GTD-5, CentraNet, 5ESS manual CustoPAK Optional Features, Speed Dialing

Page 17

Speed Dialing

Speed Dialing allows you to call frequently dialed numbers by using an abbreviated code, reducing dialing time and time spent searching for telephone numbers. Speed Dialing gives you the flexibility to create and edit your own Speed Dialing list. The Speed Dialing short list consists of 8 numbers unless you have a 5ESS switch type, which provides a 6-number Speed Dialing list.

To establish/add or change a number on your Speed Dialing list:

Lift the handset and listen for dial tone.

Press * 7 4 and listen for confirmation tone.

Press # 1 (GTD-5 only, skip this step in all other switches).

Press the Speed Dialing code numbers to be programmed (2-9 for all switches except 5ESS, press 2-7 for 5ESS).

Dial the telephone number to be assigned to the code, along with any required access codes, ( i.e., long distance carrier access code) up to 28 digits.

Listen for confirmation tone.

Hang up.

Repeat steps for each code number to be programmed.

To place a Speed Call from the short list:

 

Lift the handset and listen for dial tone.

 

Press # 1 (all switches) and then dial the Speed Dialing code number

 

(2-9 or 2-7 depending on what switch type you have). See page 50 for

 

Speed Dialing code charts.

 

Wait for party to answer.

NOTES:

1.)

OPTIONAL: After you press # 1 and the code number, press # again

 

for a quicker connection.

2.)

Service codes such as 911, cannot be programmed.

3.)

Fully restricted lines cannot have Speed Dialing.

4.)

Customers may experience a 2- to 3-second timing delay when activating

 

Speed Dialing codes that match other feature activation codes.

CustoPAK Optional Features

The following features are available for each of your CustoPAK lines at an additional monthly charge per line. As you read through this section, be aware of your switch type (found on the front cover of this guide), since some of these Optional features are not available for certain switch types. To add or change any of these features after your initial installation, contact your Verizon representative.

30

31

Image 17
Contents CentraNet CustoPAK CentraNet CustoPAK Service Table of Contents Introduction to This Guide Help Desk Overview of Your CustoPAK SystemRepair Assume Dial CustoPAK Basic FeaturesTerms You Should Know Call Transfer Call HoldConsultation Hold SwitchDirect Inward/Outward Dialing DID/DOD To place a call on holdIntercom To use the Intercom featureThree-Way Calling While engaged in a two-way conversationTouch-Tone CustoPAK Selectable FeaturesAutomatic Callback To cancel an Automatic Callback requestCall Forwarding Options Option SectionTo turn Call Forwarding off Call ForwardingTo turn Call Forwarding on Call Forwarding Don’t Answer Call Forwarding Busy Line Call Pick-Up Group To use Call Pick-Up Group when you are already on the phone Call Restriction Options To use Call Pick-Up GroupTo cancel the Call Waiting tone before placing a call Cancel Call Waiting Tone BlockTo cancel the Call Waiting tone during a call Call WaitingDial Call Waiting for Intercom dialing HuntingTo place a Speed Call from the short list CustoPAK Optional FeaturesSpeed Dialing To activate *69 Busy RedialTo deactivate *69 After dialing a busy numberCall Park Call Block *60Call Trace Call Park DirectedTo park a call against another CustoPAK number To retrieve parked calls from any lineCaller ID Number Only Caller IDLast Number Redial Enhanced Call ForwardingExecutive Busy Override Select Call Forwarding Priority CallDMS 10 Speed Dialing Code Charts Intercom Code ChartsVoice Mail and CustoPAK AppendixTo make an Intercom call Intercom Code ChartsTo establish or change your Speed Dialing list Speed Dialing Code ChartsTo make a call using Speed Dialing GTD-5, DMS 100 and DMS 10 Speed Dialing List Feature Availability by Switch Type CustoPAK Feature Activation/Deactivation CodesFeature Telephone Numbers Your CustoPAK Feature Selections