Verizon CentraNet Call Park Directed, Call Trace, To park a call against another CustoPAK number

Page 20

Call Park – Directed

This feature is an enhancement to Call Park. It performs the same functions

as Call Park, but it allows you to park calls against any number in the CustoPAK system except your own. Only one call can be parked against a CustoPAK line at a given time. This feature is not available for GTD-5 and DMS 10 switch types.

To park a call against another CustoPAK number:

Tell the person to whom you are speaking that you are going to put them on hold.

Press the switchhook (or the Tap/Flash/Recall/Link button, depending on your telephone set).

Press * 1 4 .

Dial the Intercom number of the station where you wish to park the call.

Hang-up.

To retrieve parked calls from any line:

Lift the handset and listen for dial tone.

Press * 1 2 . If a call is parked against the line from which you are retrieving it, you will be automatically connected. If you are retrieving the call from a different line, dial the Intercom number of the line that the call is parked against.

Begin your conversation.

NOTES:

1.) If a parked call is not retrieved, the parking station will be recalled when idle.

2.) The station in the “call parked” condition and the station with Call Park – Directed activated cannot use the Three-Way Calling or Executive Busy Override features.

3.) Call Waiting will not activate against a number in a “parked” condition.

4.) Call Park – Directed cannot be used to answer an Automatic Callback call.

5.) Call Park – Directed cannot be activated against a line with Call Forwarding.

6.) Call Park – Directed cannot be applied to a member of a Hunt group.

7.) Call Park – Directed overrides Series Hunting and Call Forwarding – Don’t Answer.

8.) The Call Park – Directed access code and the station number must be dialed before you know if the call has already been retrieved.

Call Trace

This protective feature enables you to trace the number of the last threatening or harassing call received, as long as the call originates from within your regional calling area. The calling party’s number will automatically be reported to Verizon, and in some areas you will be charged for each successful trace. This feature is not available in the DMS 10 switch type.

If you receive a life-threatening or harassing call:

Hang up.

Lift the handset and listen for dial tone.

Press * 5 7 and follow the voice-recorded instructions.

A voice recording will tell you if the call trace has been completed successfully.

To take legal action, record the exact date and time of the call and contact Verizon within 10 days at the number provided by the voice recording. If you forget that number, call the Customer Contact Center for assistance. If the situation is an emergency, call your local law enforcement agency.

NOTES:

1.) If you successfully trace a call and choose to take further action, you must contact Verizon within 10 days or the call record will no longer be stored in the system.

2.) The records of any Call Trace request will be released only to a law enforcement agency.

3.) In some areas, Call Trace is available on a pay-per-use or subscription basis.

4.) Call Trace cannot trace a call that was forwarded by way of Call Forwarding or Call Forwarding – Busy Line.

5.) If Call Trace is activated after receiving a Call Waiting tone, the waiting call will be traced, whether answered or not.

6.) This feature must be applied to all members of a Hunt group.

36

37

Image 20
Contents CentraNet CustoPAK CentraNet CustoPAK Service Table of Contents Introduction to This Guide Help Desk Overview of Your CustoPAK SystemRepair Assume Dial CustoPAK Basic FeaturesTerms You Should Know Call Hold Call TransferSwitch Consultation HoldDirect Inward/Outward Dialing DID/DOD To place a call on holdTo use the Intercom feature IntercomThree-Way Calling While engaged in a two-way conversationCustoPAK Selectable Features Touch-ToneTo cancel an Automatic Callback request Automatic CallbackCall Forwarding Options Option SectionTo turn Call Forwarding off Call ForwardingTo turn Call Forwarding on Call Forwarding Busy Line Call Forwarding Don’t AnswerTo use Call Pick-Up Group when you are already on the phone Call Pick-Up GroupCall Restriction Options To use Call Pick-Up GroupCancel Call Waiting Tone Block To cancel the Call Waiting tone before placing a callTo cancel the Call Waiting tone during a call Call WaitingHunting Dial Call Waiting for Intercom dialingTo place a Speed Call from the short list CustoPAK Optional FeaturesSpeed Dialing Busy Redial To activate *69To deactivate *69 After dialing a busy numberCall Block *60 Call ParkCall Park Directed Call TraceTo park a call against another CustoPAK number To retrieve parked calls from any lineCaller ID Caller ID Number OnlyLast Number Redial Enhanced Call ForwardingExecutive Busy Override Priority Call Select Call ForwardingIntercom Code Charts DMS 10 Speed Dialing Code ChartsVoice Mail and CustoPAK AppendixIntercom Code Charts To make an Intercom callTo establish or change your Speed Dialing list Speed Dialing Code ChartsTo make a call using Speed Dialing GTD-5, DMS 100 and DMS 10 Speed Dialing List CustoPAK Feature Activation/Deactivation Codes Feature Availability by Switch TypeYour CustoPAK Feature Selections Feature Telephone Numbers