WALKER W300 FEATURES
➤Backlite Keypad
The keypad features large translusent back lite buttons that will make calling easier.
➤Nite Lite
The Nite Lite feature illuminates the key pad and 3 extra large storage buttons. The Nite Lite makes the keypad visable when the phone is hung up, allowing it to be easily located at night. The Nite Lite can be adjusted to OFF, LO and HIGH.
2.Pick up the handset and listen for the caller’s voice or a dial tone. Watch the green sound level light located on the phone base, next to the program button. It should sign steady.
3.When placing a call, dial as you would any phone and wait for someone to answer.
4.Press the Boost Button
5.Adjust the Clarity® Power ControlTM upwards to a level where the other party’s voice is heard loud and clear, and begin conversation.
➤Neck Loop/Auxillary Port
The W300 has a 3.5mm phono jack to use with a neck loop. The volume to the neck loop is controlled with the Clarity Power Control. When the neck loop is plugged in, the receiver in the handset is disabled.
Once you have installed your Walker W300 according to the instructions noted previously, it will be ready to use.
➤To Place or Receive a Call:
1.Adjust the Clarity® Power ControlTM to its lowest setting (zero).
6.When you complete the call, return the handset.
7.After hanging up, the sound level will reset according to the position of the reset switch on the back of the telephone. See Boost Override.
8.Pressing the Boost Button during subsequent conversations will return the volume to your set sound level.
Note: If you made an error while dialing, just depress the hookswitch, listen for a dial tone, and dial again.
16 | Walker W300 |