WALKER W300 FEATURES
responding to these prompts. In summary, dial the phone number you want to call in pulse mode, switch to tone mode to inter- act with the automated answering system, switch back to pulse mode when your call is done. When switching from Pulse to Tone during a call, there will be a 3 second delay from the time you first push a key in tone mode until the key press is transmit- ted. You cannot switch from tone to pulse during a call.
Important: You must have tone signaling service to use the TONE feature on the Walker W300. If in doubt, contact your local telephone company.
➤To Set the TONE/PULSE Switch:
1.Move the switch towards the correct setting.
2.Depress the hookswitch once.
3.The phone will now dial in the mode you selected.
➤Last Number Redial
Last Number Redial allows you to auto- matically redial the last telephone number you called. This feature is convenient for
redialing numbers which are busy. The phone number stored for redial will be reset with every new call you make.
➤To Operate Last Number Redial:
1.Depress the hookswitch to get a new dial tone.
2.Press the “Redial” Button once.
3.Stay on the line, and your call will be dialed.
The last number dialed will be stored in the Walker W300 for you until you dial another number or disconnect the tele- phone from the wall jack.
➤Flash
Flash is a special feature that is required to use some calling services provided by your local phone company, such as call waiting. Consult your guide to these services which is available from your local phone company. Flash serves the same purpose as pressing and releasing the hook switch very quickly.
14 | Walker W300 |